Konica Minolta magicolor 5430 DL Service Manual page 151

Menu (magicolor 5450)
C. TRAY 1/CUSTOM SIZE
Function • Sets the CUSTOM SIZE of media in Tray 1.
Use • To specify the custom size media loaded in Tray 1.
Setting 1. Select "PAPER SOURCE" and press the MENU/SELECT key.
/procedure 2. Select "TRAY 1" and press the MENU/SELECT key.
3. Select "PAPER SIZE" and press the MENU/SELECT key.
4. Select "CUSTOM SIZE" and press the MENU/SELECT key.
5. Select "CUSTOM SIZE" again and press the MENU/SELECT key.
6. Select "Desired DIMENSION" and press MENU/SELECT key.
7. Set "Desired number" with the Up key /Down key
key.
For North America
• The default setting of WIDTH is "8.50 inches."
WIDTH: "3.63 inches to 8.50 inches."
• The default setting of LENGTH is "11.00 inches."
LENGTH: "5.83 inches to 14.00 inches."
For other destinations
• The default setting of WIDTH is "210 mm."
WIDTH: "92 mm to 210 mm."
• The default setting of LENGTH is "297 mm."
LENGTH: "148 mm to 356 mm."
NOTE
• By changing the "UNIT OF MEASURE" setting (INCHES/MILLMETERS), the
custom size units are changed.
D. TRAY 1/PAPER TYPE
Function • Sets the media type for Tray 1.
Use • To specify the type of media loaded in Tray 1.
Setting 1. Select "PAPER SOURCE" and press the MENU/SELECT key.
/procedure 2. Select "TRAY 1" and press the MENU/SELECT key.
3. Select "PAPER TYPE" and press the MENU/SELECT key.
4. Select "Desired paper type" and press MENU/SELECT key.
• The default setting is "PLAIN PAPER."
ANY /PLAIN PAPER /RECYCLED /THICK1 /THICK2 /LABEL STOCK
/TRANSPARENCY /ENVELOPE /POSTCARD /LETTERHEAD /GLOSSY STOCK
NOTE
• ANY identifies any media type.
and press the MENU/SELECT
3-48
Main Unit Field Service