Main Unit Field Service
2.4.12
0310H: Laser malfunction
PH Unit
Step
Check the cable and connector for proper con-
1
nection and correct as necessary.
2
Change PH Unit.
3
Change PWB-A.
2.4.13
0500H: Heating Roller warm-up failure
2.4.14
0501H: Fusing Pressure Roller warm-up failure
2.4.15
0510H: Abnormally low Heating Roller temperature
2.4.16
0511H: Abnormally low Fusing Pressure Roller temperature
2.4.17
0520H: Abnormally high Heating Roller temperature
2.4.18
0521H: Abnormally high Fusing Pressure Roller temperature
Fusing Unit
Step
Check the Fusing Unit for correct installation
1
(whether it is secured in position).
Check the Fusing Unit, LV, and PWB-A for proper
2
connection and correct as necessary.
3
Change Fusing Unit.
4
Change PWB-A.
5
Change LV.
Relevant Electrical Parts
Mechanical Control Board (PWB-A)
Action
Relevant Electrical Parts
Mechanical Control Board (PWB-A)
Low Voltage Unit (LV)
Action
4-21
Malfunction code
WIRING DIAGRAM
Location
Control Signal
(Electrical
Component)
-
-
-
WIRING DIAGRAM
Location
Control Signal
(Electrical
Component)
-
-
-
-
-
-
-
-
-
-
-
-
-