Auto Continue; Hold Job Timeout; Energy Saver - Konica Minolta magicolor 5430 DL Service Manual

Main Unit Field Service
7.7.5

AUTO CONTINUE

Function • At the time of the following Operator Call, continues auto printing by ignoring the
media type or size.
• "PAPER EMPTY" (except "MANUAL FEED"), "xxxx SIZE ERROR", "xxxx TYPE
ERROR".
Use To specify whether printing should continue when the specified media size and type are
not available.
Setting ON: Auto continuous printing is ON.
/procedure OFF: Auto continuous printing is OFF.
1. Select "AUTO CONTINUE" and press the MENU/SELECT key.
2. Select "Desired setting" and press the MENU/SELECT key.
• The default setting is "ON."
7.7.6

HOLD JOB TIMEOUT

Function • Sets the amount of time before a job saved temporarily in the printer is automatically
deleted.
Use • To change the amount of time a job is held before being deleted.
Setting 1. Select "HOLD JOB TIMEOUT" and press the MENU/SELECT key.
/procedure 2. Select "Desired auto delete time" with the Up key /Down key
MENU/SELECT key.
• The default setting is "DISABLE." (No auto delete.)
DISABLE
NOTE
• This menu is available only when an optional Hard Disk unit is installed.
7.7.7

ENERGY SAVER

Function • Sets whether the printer should go into Energy Saver mode when not printing or pro-
cessing a print job and when the Control Panel is not being used. To set the amount
of time before Energy Saver mode is activated, use the "ENERGY SAVER TIME"
menu.
• Energy Saver mode is automatically canceled when any of the following operations is
performed:
The machine is restarted.
A print job is received.
Any of the keys on the Control Panel is pressed.
The Front Door or Right Door is opened and closed.
Use To specify whether Energy Saver mode is to be used.
Setting 1. Select "ENERGY SAVER" and press the MENU/SELECT key.
/procedure 2. Select "Desired setting" and press the MENU/SELECT key.
• The default setting is "ON."
ON
1 hour 4 hours
ON
3-69
Menu (magicolor 5450)
OFF
and press the
1 day 1 week
OFF