Transfer Power /Image Adj Param - Konica Minolta magicolor 5430 DL Service Manual

Main Unit Field Service
F. TRANSFER POWER /MANUAL DUPLEX
Function • Adjusts the transfer power when manually duplexed pages have image quality prob-
lems (void areas or white spots).
Use • To correct manually duplexed pages with image quality problems (void areas or white
spots) due to the characteristics of the media being used.
Setting PLAIN PAPER: Adjust the image quality (void areas, white spot) of plain paper.
/procedure THICK 1: Adjust the image quality (void areas, white spot) of thick paper 1.
THICK 2: Adjust the image quality (void areas, white spot) of thick paper 2.
POSTCARD: Adjust the image quality (void areas, white spot) of postcard.
ENVELOPE: Adjust the image quality (void areas, white spot) of envelope.
• If void areas occurs, adjust in the plus levels.
• If white spots occurs, adjust in the minus levels.
1. Select "TRANSFER POWER" and press the MENU/SELECT key.
2. Select "MANUAL DUPLEX" and press the MENU/SELECT key.
3. Select "Desired paper type" and press the MENU/SELECT key.
4. Select "Desired adjustment amount" with the Up key /Down key
MENU/SELECT key.
• The default setting is "0."
"-8" to "+7" (16 steps)
8.3.4

TRANSFER POWER /IMAGE ADJ PARAM

Function • Adjusts the Printer in case of an image quality problem (uneven density)
Use • To correct image quality problems (uneven density) due to the Printer being operated
at a high altitude.
Setting 1. Select "IMAGE ADJ PARAM" and press the MENU/SELECT key.
/procedure 2. Select "Desired adjustment amount" with the Up key /Down key
MENU/SELECT key.
• The default setting is "0."
0
NOTE
• When the setting has been changed, be sure to run a CALIBRATION/AIDC
process.
☞
3-57
1 2
3-83
Service Menu (magicolor 5450)
and press the
and press the
3