Main Unit Field Service
9. After the data has finished being sent, the following message appears on the screen of
the Command Prompt.
10. Then the firmware upgrade starts. Wait until all the upgrade procedure is complete.
NOTE
• Never turn the printer Power Switch OFF and ON while the firmware is being
upgraded.
11. After the firmware upgrade is complete, "FIRMWARE UPDATE TO CONTINUE TURN
OFF THEN ON" is displayed.
12. Turn the printer's Main Switch OFF and then ON.
13. After the printer has restarted, check that a "READY" message is displayed.
14. From the Menu, select PRINT MENU → CONFIGURATION PG and execute the func-
tion. Then, check that the firmware [2] has been upgraded.
☞ For how to execute "CONFIGURATION PG," see "III Adjustment/Setting."
PRINTER INFORMATION
DATE
TIME
CONTROLLER F/W
ENGINE F/W
BOOT F/W
TOTAL PAGE COUNT
SERIAL NUMBER
FIRMWARE UPDATE
WRITING DATA XX%
FIRMWARE UPDATE
TO CONTINUE
TURN OFF THEN ON
MM.DD.YYYY
HH.MM
413830F0120000(US)
413850G5110000(US)
413899F0110000
7
******
2-27
Firmware Upgrade
4138F2E010DA
4138F2E011DA
[2]
4138F2E007DA
4138F2E005DA