Konica Minolta magicolor 5430 DL Service Manual page 77

Other
7. Remove Parameter Chip (IC15) [10] from the Mechanical Control Board.
NOTE
• When the Mechanical Control Board (PWB-A) has been replaced, be sure to
remount Parameter Chip (IC15). Unmount Parameter Chip (IC15) from the old
Mechanical Control Board and mount it on the new Mechanical Control Board.
NOTE
A
• When mounting Parameter Chip
A
4138fs2544c0
2-40
Main Unit Field Service
(IC15), make sure the notches ("A")
are precisely lined up.
[10]
4138fs2074c2