No Print Cycles Can Be Run As Commanded Via The Network - Konica Minolta magicolor 5430 DL Service Manual

Image Quality Problems
5.1.18

No print cycles can be run as commanded via the network

A. Troubleshooting Procedure
Step Section
1 PWB-P
2
Operation Panel/
MENU
3
4 PWB-P
Check Item
Is the Ethernet cable connected
properly?
Are the network address and
other data input correctly?
Is the Network/Forced Modes set-
ting made correctly according to
the network environment being
used?
(magicolor 5430 DL/5440 DL)
Is the INTERFACE MENU/ETH-
ERNET/TCP/IP/SPEED/DUPLEX
setting made correctly according
to the network environment being
used? (magicolor 5450)
Is the PWB-P connector con-
nected properly?
4-50
Main Unit Field Service
Result Action
NO Reinstall.
NO Retype.
NO Reset.
NO Reinstall.
YES Change the PWB-P.