Misfeed At Manual Feed Tray Media Feed Section (Misfeed At Tray 1 Media Feed Section) - Konica Minolta magicolor 5430 DL Service Manual

Jam Display
1.5.3 Misfeed at Manual Feed Tray media feed section
(Misfeed at Tray 1 media feed section)
NOTE
• Make sure to note that the feed trays are named differently, depending upon the
printer model.
• The following procedures use the name for magicolor 5430 DL/5440 DL.
A. Detection Timing
Type
Detection of
The media does not unblock the Synchronizing Roller Sensor (PC4) even after
misfeed at Manual
the lapse of a given period of time after the media feed sequence has been
Feed Tray
started.
media feed section
B. Action
Synchronizing Roller Sensor (PC4)
Manual Feed Tray Paper Feed Clutch (CL3)
Intermediate Transport Motor (M3)
Step
1 Initial check items
2 PC4 sensor check
3 CL3 operation check
4 M3 operation check
5 Change PWB-A.
magicolor 5430 DL / 5440 DL
MANUAL FEED TRAY
Relevant Electrical Parts
Action
4-6
Main Unit Field Service
magicolor 5450
TRAY 1
Description
Mechanical Control Board (PWB-A)
WIRING DIAGRAM
Control Signal
-
PWB-A PJ15A-3 (ON)
PWB-A PJ6A-4 (ON)
PWB-A PJ27A-8 (LOCK)
PWB-A PJ27A-5 (REM)
-
Location
(Electrical
Component)
-
2-H
2-B
2-I
-