Pressure/Retraction Clutch /1St Image Transfer (Cl4) - Konica Minolta magicolor 5430 DL Service Manual

Main Unit Field Service
[7]
[12]
4.4.30

Pressure/Retraction Clutch /1st Image Transfer (CL4)

[3]
[8]
[9]
[10]
[11]
4138fs2536c1
[1]
[2]
4138fs2040c0
[4]
[6]
[5]
4138fs2041c0
2-53
9. Snap off the C-clip [8], and remove
the bearing [9] and the Pressure/
Retraction Clutch/2nd Image Trans-
fer [10].
Precautions for Reinstallation
• When reinstalling the bearing and
Pressure/Retraction Clutch/2nd
Image Transfer, make sure that the
protrusion [11] on the Pressure/
Retraction Clutch/2nd Image Trans-
fer fits into the locking slot [12].
1. Remove PWB Box/1.
☞ 2-47
2. Remove PWB Box/2
☞ 2-48
3. Disconnect the connector [1],
remove three screws [2], and pull out
the Pressure/Retraction Clutch/1st
Image Transfer Assy [3].
4. Snap off the E-ring [4], and remove
the bearing [5] and the Pressure/
Retraction Clutch/1st Image Trans-
fer [6].
Other