Printer Settings]; [Startup; [Auto Continue]; [Paper Settings] - Konica Minolta bizhub 4050 User Manual

5.7

[Printer Settings]

5.7 [Printer Settings]
[Startup Page Setting]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Startup Page Setting]
Select whether or not to print the start page when turning this machine on.
[OFF] is specified by default.

[Auto Continue]

To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Auto Continue]
Select whether or not to continue printing when the paper size and type of print job are different from that of
the paper loaded in the paper tray.
[OFF] is specified by default.

[Paper Settings]

To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Paper Settings]
Specify the paper to be used ordinarily.
Settings
[Paper]
[Measurement Unit Set-
ting]

[Hold Job Timeout]

To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Hold Job Timeout]
Specify the time period during which a print job is stored on the HDD.
-
Select from [1 Hour], [4 Hours], [1 Day], or [1 Week].
-
When not holding a print job, select [Disable].
[Disable] is specified by default.

[Quality Settings]

To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Quality Settings]
Adjust the image quality of the printed image.
Settings
[Brightness]
[Contrast]
[Description of Utility Keys]
Description
Specify the size and type of the paper to be printed ordinarily.
• [Paper Size]: Select the paper size when using standard-size paper. The
default value depends on the region the machine is used in.
• [Custom Size]: Enter the width and length of paper when using custom-size
paper.
• [Paper Type]: Select the type of the paper to be used. [Plain Paper] is spec-
ified by default.
Select a system of units for the paper to be used ordinarily from [mm] or [Inch].
The default value depends on the region the machine is used in.
Description
Adjust the brightness of the printed image.
[0%] is specified by default.
Adjust the luminance difference between light and dark in the image to be
printed.
[0] is specified by default.
5
5-20