Bajaj Dominar 400 Service Manual page 8

1
Identificación
Secondary speedo
Speedometer screen operate when the ignition switch is in the 'ON' position.
1. malfunction indicator (): Blinks when an abnormality is seen in operation
of injection system or its components.
2. Low Battery Indicator: Indicates that you need to charge the battery.
3. Bajaj Logo: The logo of Bajaj 'B' is permanently on.
4. Indicator Light High: If the headlight is on high beam and selected, the indicator lights.
5. Indicator ABS (Yellow) (ABS): With the ignition ON ABS indicator lights on.
When the vehicle speed exceeds 10 km / h ABS indicator will turn off, if the indicator stays on while driving, it indicates a fault
in the ABS unit.
6. Indicator Temp. Coolant (): Blinks when the coolant temperature is higher 110 C.
7. Side stand indicator: When the side stand is in use, the indicator lights. (Ignition lock in 'ON').
Speedometer configuration
1. Reset Partial Odometer:
• The Mode and Set buttons are used to select
/ adjust the general odometer and the odometers 'TRIP1
/ TRIP2'.
Press the M button
1
for less than 2 sec.
Press the S button
2
for more than 5 sec.
Bajaj Auto International Business
4
Reminder
Service
The mode changes from:ODO
/ TRIP1 / TRIP2'
The selected partial odometer will
be reset. The other one does not.
2. Reset the Service reminder
The symbol of the key will light up when the odometer
reaches a certain mileage.
This icon will light up to
1st : 450 Kms 2nd : 4450 Kms
3rd : 9450 Kms 4th : 14450 Kms
and successively to reach 5000 kilometers. Note: Take
the bike to an authorized service Bajaj to reset the
indicator.
( ) :