Bajaj Dominar 400 Service Manual page 140

Sistema Eléctrico
Procedimiento de Revisión Eléctrica
Ignition switch Measurement and Test Equipment: Multimeter
kill switch
Equipo de Medición y Prueba: Multímetro
range
Brown + ve
continuity
Marrón
SOP:
•Ignition switch in the OFF position.
•Disconnect the coupling of the ignition lock.
•Check continuity between cables ON and OFF.
Standard value:
•Continuity beep sound to ON. There is no continuity in the OFF
position.
Conexiones
range
Conexión Conexión
+ve
continuity
Brown /
Gray
mode
Blue
/Red
Test and measurement equipment:Multimeter
SOP:
•Turn the ignition switch OFF.
•Turn off the switch OFF.
•Set the multimeter to continuity mode.
•Connect the multimeter as shown in the table above.
connections
-ve connection
white
Condición
-ve
continuity
on
off
no continuity
Manual de Servicio Bajaj Dominar 400
continuity
OFF - No continuity ON
ON - - Continuity
Resultado
135