Bajaj Dominar 400 Service Manual page 39

Leo y Aprendo
SOP: Regulación de la Luz de Válvulas
• Place the new shim in the valve lock.
• Fit rocker shaft, rocker arms and washers (3 und)
• Replace rocker arm cap.
• The feeler gauge should have a slight resistance to
slide it after adjusting the valve clrnc.
• Complete an engine rotation and check the clrcn again for
valves
• Prefix the bolts on the cylinder head cover, adjust them to the
tightening torque
recommended with a torque wrench.
• Replace the heat-resistant rubber cover and
make sure the slots are properly placed in the clamps •
Assemble all parts that have been removed.
Manual de Servicio Bajaj Dominar 400
35