Bajaj Dominar 250 BS VI Owner's Manual

Bajaj Dominar 250 BS VI Owner's Manual

Hide thumbs Also See for Dominar 250 BS VI:

Advertisement

Owner's Manual
BS VI

Advertisement

Table of Contents
loading

Summary of Contents for Bajaj Dominar 250 BS VI

  • Page 1 Owner’s Manual BS VI...
  • Page 2 REV. 03.MAR. 2021 DOC. NO. 71120143...
  • Page 3 You are now the proud owner of the modern masterpiece, parts, oil and trained manpower to ensure the best care Dominar 250 BS VI. The new Dominar 250 BS VI is for your Dominar. Your ‘Dominar 250 BS VI’ comes with a...
  • Page 4: Table Of Contents

    The essential features of the type described and followed. illustrated herein remaining unaltered. Bajaj Auto Limited reserves the right to carry out at any moment without being obliged to bring this booklet upto-date Caution: This indicates that a potential hazard that could result in &...
  • Page 5: Technical Specification

    TECHNICAL SPECIFICATIONS PARAMETER Dominar 250 BS VI PARAMETER Dominar 250 BS VI Engine Fuel Tank Capacity Engine 4 Stroke, Single Cyl. Full 13 liters Bore x Stroke 72 mm x 61.1 mm Reserve Engine Displacement 248.77 cc Dimensions Compression Ratio 11.9:1...
  • Page 6 PARAMETER Dominar 250 BS VI PARAMETER Dominar 250 BS VI ABS Indicator LED-YELLOW Electricals Electrical System 12 Volts DC Rear No. Plate Lamp Horn Head Lamp Battery 12V 8Ah VRLA Position Lamp Tail /Stop Lamp Vehicle Weight Side Indicator lamp...
  • Page 7: Identification Data

    IDENTIFICATION DATA The Frame and Engine serial numbers are used to register the motorcycle. They are the unique alpha-numeric codes to identify your particular vehicle from others of the same model and type. FRAME NUMBER ENGINE NUMBER LOCATION LOCATION On Seat Mounting Bracket On LH Side Crankcase Near Gear (Alpha-Numeric - 17 Digits) Change Lever (Alpha-Numeric - 11 Digits)
  • Page 8: Location Of Parts

    LOCATION OF PARTS Primary Speedometer Grab Handle Secondary Front Pillion Seat Speedometer Brake Lever Rider Seat Rear LED Head Number plate Lamp Front Fork Rear Disc Brake Oil Inspection Window Belly Rear Brake Coolant Pedal Front Disc Brake Inspection Window...
  • Page 9: Steering Cum Ignition Lock

    STEERING CUM A common key is used for ‘Steering cum Ignition lock’, IGNITION LOCK ‘Fuel tank cap’ & ‘Rear Seat’ It has three positions. “Cranking ON and OFF duration” control – • During Engine crank cycle cranking is allowed only for fixed duration and in between successive cranks (in ase engine does not start) here is a cooling off period.
  • Page 10: Fuel Tank Cap & Secondary Speedometer

    2. Low Battery Indicator : It indicates battery needs charging. cap. ‘Click’ sound ensures cap is fully locked. 3. Bajaj Logo : Bajaj logo flying ‘B’ glows continuously. PRECAUTION 4. Hi Beam Indicator : When Headlight is ‘ON’ & Hi beam is selected , Hi Don't attach metallic ‘Key chain’...
  • Page 11: Primary Speedometer Details

    SPEEDOMETER DISPLAY PRIMARY WILL WORK WHEN IGNITION SWITCH IS IN ‘ON’ POSITION. SPEEDOMETER DETAILS Tachometer Dial: It shows engine speed in RPM. Service Reminder ( ): ‘Wrench’ symbol glows when ODO meter reading reaches to set Kms. It indicates vehicle is due for periodic service. This Icon will flash at:1 : 450 km, 2 : 4450km, 3 : 9450 km, 4 : 14450 km and...
  • Page 12 Trip Meter : Trip 1 & Trip 2 shows the 10. Fuel Level Indicator: It shows approximate fuel distance traveled since it was last reset to level in fuel tank. zero. Rolls over to zero after 999.9 km & 11. Low Fuel Level Indicator : It blinks incase of continue updating.
  • Page 13: Twin Channel Abs System

    TWIN CHANNEL means your ABS is active. Also it is recommended to use both front & rear ABS SYSTEM brakes simultaneously. Always slow down when cornering. The anti-lock Always maintain a safe distance between you and brake system cannot prevent accidents resulting objects ahead.
  • Page 14: Primary Speedometer Setting

    TRIP 1 / Service TRIP 2 reminder icon Mode PRIMARY SPEEDOMETER SETTING TRIP METER RESET SERVICE REMINDER RESET ( ) • Mode & Set push button is provided for ‘Wrench’ symbol glows when ODO meter selecting & resetting ‘ODO/TRIP1/TRIP2’. reading reached to set Kms. Press mode push This icon will glow at- Mode changes from...
  • Page 15 Clock Mode CLOCK RESET Press mode push button TRIP1 Mode selected • Digital clock indicates for less than 2 sec. time in HR & MM Press mode & set push ‘:’ stops blinking separated by colon ‘:’ button together for more than Digits starts blinking 2 sec.
  • Page 16: Control Switch Rh

    B. Starter Button CONTROL Starter button operates the electric starter. It is recommended to start the engine with the SWITCH RH transmission in neutral. Vehicle in Gear - Press clutch lever & operate starter button to start the engine. A. Head Light Switch C.
  • Page 17: Automatic Headlamp & Lights Operation

    AUTOMATIC HEADLAMP & LIGHTS OPERATION • Your vehicle has a safety feature which turns ON the headlamp automatically, once the engine is started. This provides better visibility to other road users. • While riding, low beam or hi beam mode can be switched ON by operating the low/hi beam selector switch, keeping the light switch in head light mode.
  • Page 18: Control Switch Lh

    F. Horn Button ) Press button for sounding horn. G. Pass Switch Press the switch to put on Hi Beam Control Switch LH filament of head light. It is used to give signal to vehicles coming from opposite side while overtaking. LEFT HANDLE BAR SWITCHES D.
  • Page 19: Removal Of Pillion & Rider Seat / Tool Kit

    First Aid Kit Tool Kit Removal of Pillion & Rider Seat / Tool Kit TOOL KIT LOCATION Removal of Pillion Seat • Insert Key into lock (A) • Took kit fitment location is provided below pillion seat assembly. • Turn the key clock wise. •...
  • Page 20: Fitment Of Rider & Pillion Seat

    Fitment of Rider & Pillion Seat Fitment of ‘Rider Seat’ Fitment of ‘Pillion Seat’ • Match the bracket of ‘Rider seat’ (A) • First make sure ‘Rider seat’ is fitted with slot (B), Ensure availability of rubber properly. damper of seat center. •...
  • Page 22: How To Ride Your Bike

    How to Ride Your Bike Incase of battery discharged condition, vehicle will Gear shifting start by push start. Lever The motorcycle is equipped with a clutch switch. Gear shifting pattern This switch ensures that the engine can be started in any gear if the clutch lever is pressed. 1.
  • Page 23 Recommended Speed for Shifting Down 68 km/h From 6 to 5 Gear Warning : When shifting down to lower gear, do not shift at such high speed that engine rpm jumps 62 km/h From 5 to 4 Gear excessively. This may cause engine damage, & rear 46 km/h From 4 to 3 Gear...
  • Page 24 3. If engine coolant temperature crosses 110 C, • Always keep the speed below the limits Coolant Temperature Indicator ( ) will get ON mentioned in the table. indicating engine is overheated • Do not race the engine excessively. If vehicle is further driven in such a condition •...
  • Page 25: Good Riding Habits

    Good Riding Habits • Always fill 91 octane petrol at reputed petrol pumps for optimum performance of bike. • Always maintain minimum 3 liters petrol • Press clutch lever fully while shifting gears. in petrol tank for smooth functioning of •...
  • Page 26: Safe Riding Tips

    • Always wear Helmet while driving or riding. Your helmet • It is suggested to customer to take appropriate care in area of heavy monsoon or high rainfall area. The should conform to Indian standards. • Read thoroughly the instructions given in this manual and appropriate surface preventive coat to avoid rusting / follow them carefully.
  • Page 27: Engine Oil

    It is most important to adhere to recommended grade Recommended Engine Oil: & frequency of oil change for the purpose of long life of critical engine components. For details refer periodic Always insist on Bajaj Genuine Engine Oil for maintenance chart.
  • Page 28: Tubeless Tyre & Tyre Pressure

    • Tyre warranty is settled by tyre manufacturer. • Decision is taken based on tyre wear and running of vehicle. • BAL settles tyre warranty only for imported tyres. 25 PSI 28.4 PSI 32 PSI...
  • Page 29: Battery

    2 weeks. This avoids self • Environment care must be taken to dispose discharge. off the used battery. • It is always recommended to hand over the same to the Authorised battery / Bajaj dealer for proper disposal of the same.
  • Page 30: Engine Cooling System / Coolant

    Radiator Assembly Cooling Fan Coolant Expansion Tank Engine Cooling System • Coolant is provided for cooling of engine. Fan will start at temp 95.3 C and stops at 90 C. This is normal condition & it • Water pump in the engine circulates the indicates cooling system functioning well.
  • Page 31 Use antifreeze ready to use • Always top up coolant through expansion “Bajaj Koolex” coolant only. tank cap (A). • Always replace coolant with “Bajaj Koolex” coolant Total coolant quantity : 1000 ml. only. (750~780 ml in radiator & • Use nitrile rubber hand glows while 220~230 ml expansion tank).
  • Page 32: Periodic Maintenance Information

    • ‘O’ rings must always be kept wheel free. Clean the chain by using lint free cloth (If wet for best performance hence excessive mud / slush found approach Bajaj dealer for lubricate every 500 Km. proper cleaning). • O-ring chain lubrication can •...
  • Page 34: Brake Fluid / Headlamp Care

    ‘MIN’ mark given on inspection Window. If fog inside the headlamp does not evaporate bring • Incase of level drop, use only DOT-4 brake fluid the vehicle to Bajaj Authorised Dealer for inspection. (from sealed container) for top up & replacement.
  • Page 35: Free Service Guidelines

    • Please provide your mobile number to Dealer at the time 1st Free Service 30~45 500~750 of buying of new Bajaj Vehicle. 2nd Free Service 4500~5000 In case of change in mobile number, please update to • Dealer / ASD.
  • Page 36: Periodic Maintenance & Lubrication Chart

         Servicing with water wash Top-up,R Engine oil (Bajaj DTSI 10000 oil) Top-up Top-up Top-up Engine oil Filter Engine Oil strainer & Evacuation oil strainer Air cleaner element** & air lter cover ‘O’ ring. Drain tube cleaning.
  • Page 37 Periodic Maintenance & Lubrication Chart Recommended frequency - Service interval & Kms 10th 11th 12th 13th 14th 15th 16th Remarks 34500 39500 44500 49500 54500 59500 64500 69500 74500 40000 50000 70000 75000 35000 45000 55000 60000 65000 Ensure to prevent water entry in Petrol tank, Silencer & electrical parts. ...
  • Page 38 Periodic Maintenance & Lubrication Chart Recommended frequency - Service interval & Kms Servicing Activities / Check (Free) (Free) points 4500 9500 14500 19500 24500 29500 5000 10000 15000 20000 25000 30000 Check Coolant level in expansion tank / Hose clamp adjustment Coolant &...
  • Page 39 55000 60000 65000 75000 Coolant top up if required. Use BAJAJ Koolex coolant only Replacement at every 30000 Kms or 3 year (whichever occurs earlier) Replace if required Damaged conduit / PVC sleeves protection by applying electrical tape C,A,T C,A,T...
  • Page 40 Periodic Maintenance & Lubrication Chart Recommended frequency - Service interval & Kms Servicing Activities / Check (Free) (Free) points 4500 9500 14500 19500 24500 29500 5000 10000 15000 20000 25000 30000 Side stand pivot pin Steering play C,CL,L C,CL,L C,CL,L C,CL,L Steering stem bearing &...
  • Page 41 Periodic Maintenance & Lubrication Chart Recommended frequency - Service interval & Kms 10th 11th 12th 13th 14th 15th 16th Remarks 39500 49500 69500 74500 34500 44500 54500 59500 64500 35000 40000 45000 50000 55000 60000 65000 70000 75000 Use recommended AP grease. Replace if required.
  • Page 42 Periodic Maintenance & Lubrication Chart Recommended frequency - Service interval & Kms Servicing Activities / Check (Free) (Free) points 4500 9500 14500 19500 24500 29500 5000 10000 15000 20000 25000 30000 Check & conrm all bulbs / switches working. General lubrication – Clutch lever Tyre air pressure.
  • Page 43 Periodic Maintenance & Lubrication Chart Recommended frequency - Service interval & Kms 10th 11th 12th 13th 14th 15th 16th Remarks 34500 39500 44500 49500 54500 59500 64500 69500 74500 40000 50000 70000 75000 35000 45000 55000 60000 65000 If found sticky then use recommended WD40 spray Use recommended AP grease.
  • Page 44: Non Use Maintenance

    Non-Use Maintenance Non-use maintenance is necessary if a vehicle • Fill 10% excess air pressure in both wheels. • Do not apply oil on front brake disc, to remains off road for a longer duration (more prevent rusting. If the front brake disc rusts than 15 days**).
  • Page 45: Delivery Certificate

    DELIVERY CERTIFICATE FRAME NO. ENGINE NO. Sold on.: ___________________ Customer’s Name Mr/Mrs/Miss: ______________________________________________________________________________ Address: ___________________________________________________________________ Contact No. : ____________________ I have taken possesion of motorcycle along with the following items. 1. Owner's Manual 5. Standard Accessories 2. 2 nos of key 6.
  • Page 46: Warranty Scope & Limit

    “Dominar 250 BS VI” motorcycle Bajaj Auto Limited undertake no liability in the matter of manufactured by us. consequential loss or damage caused due to the failure of the parts. Delay, if any, at the repairing workshop in...
  • Page 47 Dealers & Recommended Authorised Service Dealers. 5. All consumables like Engine oil, Fork oil, Brake Oil, Grease etc. are chargeable to customer. 4. Usage of only recommended engine oil “Bajaj DTS-I 10000 10W50” at specified frequency 6. Any defect arising...
  • Page 48 This warranty is the entire written warranty given by Bajaj sole judgement of the Bajaj Auto Limited affects its Auto Limited for “Dominar 250 BS VI” motorcycle’ and no other dealer or its or his agent or employee is authorised to performance and reliability.
  • Page 49: Battery Warranty Card

    BATTERY WARRANTY CARD MAKE OF BATTERY : ____________________________ MFG. CODE OF BATTERY: _________________________________ BATTERY SR. NO.: BATTERY CHARGING DATE: TYPE OF BATTERY: _______________________________ VEHICLE SALE DATE: _____________________________________ NAME OF OWNER AND ADDRESS: ___________________________________________________________________________ ________________________________________________________________________________________________________________ TYPE OF VEHICLE: _______________________________________________ REG. NO.: ________________________________ FRAME NO.: ______________________________________________________ ENGINE NO.: _____________________________ SERVICE RECORD *Code For Remarks:...
  • Page 50 TO BE FILLED IN BY BATTERY DEALERS / DISTRIBUTORS IN CASE OF CLAIM Name of Dealer & Code: _______________________________________________________________________________ _________________________________________________________________________________________________________ Date of claim: _______________________________________________ Battery Type : __________________________ Serial No.: _________________________________________________ Date of Fitment: _________________________ Failure Mode (Please tick as applicable) •...
  • Page 51 LONGEST ENGINE OIL CHANGE INTERVAL OF 10,000* KM Synthetic Engine Oil Ultimate Performance Top up bottle Reduced Clean Engine Smooth Friction Parts Clutch Control Always Use Bajaj Genuine Parts & High Performance Engine Oils *Top up recommended at 5000 km.

Table of Contents