Bajaj Dominar 400 Service Manual page 29

Leo y Aprendo
Lista de Revisión de Pre Entrega (PDI)
Revisar
Sound Engine abnormal sound
Front / steering fork soft cushioning performance, smooth operation. (No
difficulty moving)
Leaking oil
Specify the source of leaks
/refrigerant
4. Idle speed /% CO
Check and correct the checkpoints shown below with the engine warm
Check when the engine is warm to 60 c (1600+-100 rpm)
Idling speed
The% CO should be between 1.5 ~ 2.5% with engine warm and idling.
Review% CO
5. Visual inspection of dents, scratches, rust ...
6. Clean the vehicle thoroughly before delivery to the customer.
Ensure availability of rear wheel support in the area of ​ ​ P DI
The revision and repair should be performed only by trained company personnel
Cross out the points that are not applicable to this model
Comprobar
Si no está OK
X Si no está OK
Manual de Servicio Bajaj Dominar 400
25