Bajaj Dominar 400 Service Manual page 10

1
Identification
1. Press M for less than 2
seconds.
2. Press the button M
and S together for
more than 2seconds.
3. Press the M button
for less than 1 sec.
4.
Press the S button for
less than 1 sec.
Steering stem and ignition lock
It has 3 positions:
LOCK: Locked Handle direction. Off vehicle
OFF: Handle unlocked Vehicle off
ON: Handle unlocked. vehicle on
To lock the steering:To lock the steering, turn the steering wheel to the left. Press and turn the key to the "LOCK"
position and remove the key..You can only lock the steering on
the left..
To unlock the handle:Insert the key into the lock. Push and turn clockwise to the 'OFF' or 'ON' position
Key: A common key is used for the ignition, the fuel tank cap and the rear seat.
Bajaj Auto International Business
6
the TRIP1 mode
isselected.
'' Stops flashing digits
startflashing. The hour
digits will increase. The
minute
The digits of the hours
will increase.
The digits of the
minutes will increase.
5.
Press the button M
and Stogether for
more than 2seconds.
6. The clock setting mode
is selected and no
editing is performed
for more than
5 seconds.
Saves the time value. It is
off the clock setting. The
digits stop blinking and
blinking ':'
Exits the mode automatically
without saving the value. If
you start the engine, it will
exit the clock setting mode
without saving
the configured values.