Bajaj Dominar 400 Service Manual page 147

5
Sistema Eléctrico
Procedimiento de Revisión Eléctrica
Current Draw in the Starter Motor
Flasher
Bajaj Auto International Business
142
Location: On the crankcase gasket area.
range connections
Surround the starter motor cable
200 CC A
with theclamp meter
SOP:
• Remove the lower left and right fairing by removing the 6 star screws
that haveeach.
• Disconnect the 3 spark plug caps. (Be careful that the spark plug does
not touch the
parts
clamp screen 200 DC A
metal)
• Turn the ignition switch and the OFF switch to ON.
• Select the current range and set the clamp meter to zero.
• Surround the red input cable of the starter motor with the clamp.
• Start by pressing the start button.
• Press the start button for 3 seconds and check the current shown in
the
Location: Under the passenger seat, near the suspension unit. There is not a
method ofrevision. To test its operation try replacing it.
std value
75 ~ 80 A
(Withoutspark plug
caps)