Bajaj Dominar 400 Service Manual page 43

Leo y Aprendo
SOP: Reemplazo del Líquido de Freno
Relleno del Líquido de Freno
•Fill the master cylinder reservoir with recommended brake fluid (DOT-4)
• Perform the air purge (bleeding) in the system.
Reseat
•Rubber diaphragm.
•PVC cover.
•Cover Master Cylinder
•Press the brake handle and check
the
operation of the brake disc.
•Likewise, perform change liquid
rear brake.
• Check the brake fluid level in the master cylinder.
Note
The level of the brake fluid must be between the MAX and MIN marks.
•If the brake fluid level is below the mark "MIN"
Remove:
-Cover master cylinder.
-PVC cover.
-Rubber diaphragm
-Fill with a recommended brake fluid, so that the liquid level of the
Brake is on the "MIN" mark.
-Place all the removed parts again.
-Review the effectiveness of the brake. If it finds it spongy, purge the
air from thesystem.
Manual de Servicio Bajaj Dominar 400
39