Bajaj Dominar 400 Service Manual page 35

Leo y Aprendo
SOP: Regulación de la Luz de Válvulas
Remove
•Two bolts clutch cable
support.
•Cable clutch shaft clutch
releaser.
•Hook bolts clutch cover (2
units)
Remove
•10 cover bolts clutch wrench 8
mm
and remove the cover
•Ensure that the piston is at TDC, by aligning the input gear with the
mark on the crankcase.
•Ensures that the marking T on the sprocket of the camshaft is up.
Confirmation that the piston is at TDC:
Remove
•Bolt insert crankcase.
Note:If the tool to lock the crankshaft fits, then the piston is at TDC.
Manual de Servicio Bajaj Dominar 400
31