Bajaj Dominar 400 Service Manual page 144

Sistema Eléctrico
Procedimiento de Revisión Eléctrica
Starter relay
Location :In the chassis, on the right side of seat cowling, near s relays.
Review of the resistance of the coil of the main relay
Test and measurement equipment:Multimeter
range
connections
Conexión +ve
Start
200 Ohm
RelayRed
YellowCabl
e
SOP:
•Turn off the motor.
•Disconnect the relay.
•Connect the multimeter to the terminals of the coil of the relay.•
Check resistance.
Ohm
Review of continuity in the starter relay
Test and measurement equipment:Multimeter
SOP:
•Connect an external supply 12 V DC to the relay terminals.
•You should hear a sound 'tuc'.
•Set the multimeter to continuity mode.
•Connect the multimeter to the relay terminals.
•Continuity (beep sound) indicates that the starter relay is in good
condition. 200
Valor Estándar
Conexión -ve
Start
3.9 Ohm + 10%
RelayBlack
Cable
Manual de Servicio Bajaj Dominar 400
139