Teledyne Foxy R1 Instruction Manual page 84

® ®
Foxy R1 and Foxy R2 Fraction Collectors
Appendix A Icon Glossary and Menu Charts
A-2
Table A-1 Touch screen display icons (Continued)
Icon Description
Touch the Rack icon to open a screen from which
you can select the rack type and collection pat-
tern, and calibrate the drop former position.
The Tube Advance Speed icon allows you to
access a screen from which you can set the
speed of the tube advance motion. From the tube
advance speed screen, touch this icon to speed
up the movement.
Touch the Slow icon to slow the tube change
movement.
This icon indicates the tube advance speed set-
ting. The speed setting ranges from 1 (slowest) to
5 (fastest).
Touch the Calibrate icon to open a screen from
which you can adjust the drop former position.
When calibrating the arm, touch the First Tube
Position icon to move the drop former over the
first tube. The drop former will move to the first
tube position for the current rack configuration.
When calibrating the arm, touch the Last Tube
Position icon to move the drop former over the
last tube. The drop former will move to the last
tube position for the current rack configuration.
On two rack fraction collectors the last tube posi-
tion is on the second rack.
The Arrow icons perform several functions. In
some screens, the up and down arrows incre-
ment and decrement alphanumeric values. In
other screens, the arrows move the cursor posi-
tion. In the calibrate mode, the arrow icons finely
calibrate the drop former position.
Touch the Collection Pattern icon to toggle
between left-to-right and serpentine patterns.
Touch the Maximum Tube Number icon to specify
the last tube in a rack. The default value is the
maximum capacity of the selected rack. Users
can specify a lesser value if the rack is not filled
completely with empty tubes, or to end the run
sooner.
Touch the Serial Port icon to open a screen from
which you can configure the serial communica-
tion settings.