Teledyne Foxy R1 Instruction Manual page 74

® ®
Foxy R1 and Foxy R2 Fraction Collectors
Section 4 Serial Command Control
4-14
THRESHOLD=n This command sets the peak threshold (n=0
[none] to 100)% of the current program.
Example: Command:
Response:
The THRESHOLD command without an operand returns the
current setting.
Example: Command:
Response:
WIDTH=n This command sets the peak detection width of the
current program. Choices are:
• n=1 5 seconds
• n=2 15 seconds
• n=3 30 seconds
• n=4 1 minute
• n=5 2 minutes
• n=6 4 minutes
• n=7 8 minutes
• n=8 16 minutes
• n=9 32 minutes
• n=10 1 hour
• n=11 No slope detection
Example: Command:
Response:
The WIDTH command without an operand returns the current
setting.
Example: Command:
Response:
WINDOW=n
The maximum number of windows is four. This command sets
which window number (n=1) will be used for the WSTART and
WEND commands that follow.
Example: Command:
Response:
THRESHOLD=10
(none)
THRESHOLD
THRESHOLD=10
WIDTH=2
(none)
WIDTH
WIDTH=2
WINDOW=1
(none)