Teledyne Foxy R1 Instruction Manual page 63

Foxy
Example: Command:
Response:
CUE without an operand returns the current setting.
Example: Command:
Response:
ECHO=n This command enables or disables echoing of char-
acters received. Echoing can be used to verify correct reception of
characters. ECHO=1 will enable the echoing, ECHO=0 will
disable it. ECHO=0 is set when unit is switched to OPERATE.
Example: Command:
Response:
ECHO without an operand returns the current setting.
Example: Command:
Response:
HELP The unit will respond to this command with a list of
valid command names.
Example: Command:
Response:
Combining the HELP command with a valid command using the
"$" symbol will return more information for select commands.
Example: Command:
Response:
IDENTIFY This commands returns information identifying
the unit.
Example: Command:
Response:
® ®
R1 and Foxy R2 Fraction Collectors
Section 4 Serial Command Control
CUE=1
>
CUE
CUE=1
ECHO=1
(none)
ECHO
ECHO=1
HELP
CLEAR COLLECT...
HELP$BAUD
sets & queries the serial port baud
rate...
IDENTIFY
SERIES=3870-010, FoxyR1,
FRAC. COL., REV a, 01.00.00
4-3