Teledyne Foxy R1 Instruction Manual page 73

Foxy
The RSTIME command without an operand returns the current
setting.
Example: Command:
Response:
R1LAST=n or R2LAST=n
for Rack1 or Rack2. Choices are n=1 to n=maximum number of
tubes for programmed rack type.
Example: Command:
Response:
The R1LAST or R2LAST command without an operand returns
the current setting.
Example: Command:
Response:
R1TYPE=n or R2TYPE=n
type of the current program. Choices are:
• n=0 none
• n=1 12/13 mm tubes
• n=2 16 mm tubes
• n=3 18 mm tubes
• n=4 17 mm vials
• n=5 25/28 mm vials
• n=6 1.5 mL microcentrifuge tubes
• n=7 36 funnel prep. rack
• n=8 Bottles
• n=9 Single Beaker
• n=10 Microplates, 96 well  2
• n=11 Microplates, 96 well  6
• n=12 26 funnel prep. rack
Example: Command:
Response:
The RTYPE command without an operand returns the current
setting.
Example: Command:
Response:
® ®
R1 and Foxy R2 Fraction Collectors
Section 4 Serial Command Control
RSTIME
RSTIME=5000
These commands set the last tube
R2LAST=10
(none)
R2LAST
R2LAST=10
These commands set the rack
RTYPE=5
(none)
RTYPE
RTYPE=5
4-13