Teledyne Foxy R1 Instruction Manual page 59

Figure 3-18 Time Windows Settings menu
Foxy
_0h
_3m
_0s
2. Time Windows are either Off or combined with the selected
peak detection where all conditions must be true. Touch
the icon in the upper right corner to select the intersection
(AND) option.
Note
If a peak detection mode is not used, you must still select the
intersection (AND) option to enable Time Window operation.
3. The first displayed time values are for the start of Time
Window 1. Enter the start time using the Arrow icons. The
Up and Down Arrows increment and decrement the value;
the Left Arrow moves the cursor position. The Time Win-
dow Start value is the time from the start of the run (press-
ing the Play icon).
4. Touch the Start/End icon to advance to the end of Time
Window 1.
5. Enter the Time Window 1 end time using the Arrow icons.
This value is the time from the start of the run.
6. If you are using only one time window, touch the Enter icon
to save the settings and return to the Method Settings
menu.
To use more than one time window, touch the Start/End
icon to advance to the start of Time Window 2. Repeat the
steps to enter the start and end values for up to four time
windows. When finished, touch the Enter icon to save the
settings and return to the Method Settings menu.
Note
When programming or reviewing the Time Windows settings,
duplicate values for the start and end of a time window indi-
cates that the current time window is not used. Only the previ-
ous time windows will be used in the method.
® ®
R1 and Foxy R2 Fraction Collectors
Section 3 Programming
3-21