Disabling Leased-Line Ppp On The Ras 1500; Viewing The Status Of The Connection; Troubleshooting - 3Com 3C421600A Management Manual

270 C 17: PPP O
HAPTER
Disabling Leased-line
PPP on the RAS 1500
Viewing the Status of
the Connection

Troubleshooting

S WAN P
VER ERIAL ORT
6 Configure authentication.
set ppp receive_authentication pap
set system transmit_authentication_name branch_office
7 Save your work.
save all
To bring down the connection, issue the following command:
disable datalink ppp interface rm0/wan:1
To view the status of the link, use the
For debugging purposes, view the LCP negotiation, which is part of the
PPP negotiation. These negotiations are only visible if the loglevel is set to
"verbose" or "debug." You should also check the following:
Cable type
Users enabled
Properly configured network protocols
command.
list ppp