Using Callback And Roaming Callback; Overview; Configuring Callback Users - 3Com 3C421600A Management Manual

Using Callback and
Roaming Callback

Overview

Configuring Callback
Users
4 Configure idle and session timeouts to limit a user's time on the line or
end a call after a specified idle period:
set user <name> idle_timeout <0-86400 seconds>
session_timeout <0-86400 seconds>
Example:
set user tom idle_timeout 60000 session_timeout 60000
5 Save your work.
save all
There are two types of callback: normal and dynamic.
Normal Callback
Normal callback allows your users to dial-in to RAS 1500, hangup, and
have the RAS 1500 call you back at a preconfigured phone number.
Dynamic callback
Dynamic callback or Roaming callback allows your users to dial into your
SuperStack II Remote Access 1500, prompts for the callback number,
hangs up, and negotiates the number to be called back.
You can use the SuperStack II Remote Access 1500 to call back users.
Configuring a Normal Callback User
Use the following steps to configure a normal callback user:
1 Add a callback user:
add user [ username ] password [ password ] type network,callback
set user [ username ] callback_type normal
2 Set the callback user phone number:
set user [ username ] phone [ phone number ]
set user [ username ] alt_phone [ phone number ]
3 Save your work.
save all

Using Callback and Roaming Callback

79