Network Services - 3Com 3C421600A Management Manual

Network Services

Logout Command
Logout exits the CLI and closes the connection, ending a dial-in user or
Telnet session.
To use ClearTCP, Simple Network Management Protocol (SNMP), or
DialOut and to set values associated with them, add each network service
and related parameter. Telnet and Trivial File Transfer Protocol (TFTP) are
already enabled at startup although you can add additional services
whenever necessary.
Adding Network Services
Use the add network service command shown below:
add network service [service_name]
close_active_connections [false | true]
data [ancillary entry]
enabled [no | yes]
socket [socket number]
server_type [cleartcpd, dialout, snmpd,telnetd,tftpd]
Example:
add network service DIALOUT close_active_connections true
socket 99 data "auth=off,login_banner=\"Welcome to my Net\",
service_type=dialout,drop_on_hangup=on login_prompt=\"My
Session\""
To edit a network service, you must first disable it. After editing the
service, enable it again.
Enclose all DATA values in double quotations and all stringed DATA values
in forward slashes and a second set of double quotes.
close_active_connections Indicates whether or not to close any active
connections when a service is disabled.
Communicating with Remote and Local Sites 163