3Com 3C421600A Management Manual page 57

5 In the Presets drop-down list, select "3Com RAS-1500." (You might need
to scroll down the list.) The default TCP port number for the RAS 1500,
6000, is entered in the Port Number text box.
6 In the IP Address of Server text box, type the IP address of the RAS 1500.
7 If necessary, in the Port Number text box, type the TCP port number of
the RAS 1500.
8 Click Start. DialOut/IP determines the correct settings for the COM port.
If the process finishes with no errors, click Use Settings to configure
the selected COM port.
If the process finishes with errors, you must investigate and correct
them before proceeding.
9 Repeat steps 3 through 8 for each COM port you want to configure.
10 Close the dialog box.
Step 4: Add a Windows Dial-up Networking Connection
1 Set up a Windows Dial-Up Networking connection using the DialOut/IP
port you just configured.
2 Dial out through the connection.
Configuring Your System For DialOut/IP Software 55