3Com 3C421600A Management Manual page 172

170 C 11: C
HAPTER ONFIGURING THE
RAS 1500
ROUTER
This diagnostic tool can also be initiated from an SNMP station. Use the
following command:
ping <IP address>
background [yes | no]
count [1-1000]
data [string]
interval [1-65535]
self_destroy_delay [minutes]
size [1-1400]
timeout [1-60]
verbose [yes | no]
Example:
ping 199.55.55.55 count 3 verbose yes
The command would display the following:
PING Request: 1 Time (ms): 10
PING Request: 2 Time (ms): 0
PING Request: 3 Time (ms): 0
PING Destination: 199.55.55.55
Count: 3
Timeouts Occurred:0
Minimum Round Trip (ms):
Maximum Round Trip (ms):10
Average Round Trip (ms):1
Listing ping settings
You can use the show ping settings command to display ping
results.
Example:
PING
Maximum rows in table: 20
Status: ALIVE
0