Configuring Udp Broadcast Forwarding; Displaying Udp Broadcast Forwarding Parameters - 3Com 3C421600A Management Manual

252 C 15: C
HAPTER ONFIGURING
Configuring UDP
Broadcast Forwarding
Displaying UDP
Broadcast Forwarding
Parameters
D H C
YNAMIC OST ONFIGURATION
To allow or disallow the RAS 1500 to forward UDP packets, use the
following command:
[enable | disable] ip udp_broadcast_forwarding
For example, to enable UDP broadcast forwarding, use the following
command:
enable ip udp_broadcast_forwarding
By default, UDP broadcast forwarding is disabled.
To add or delete a UDP broadcast forwarding port, use the following
command:
[add | delete] ip udp_bcast_forwarding_port <port number>
For example, to add port 40001, use the following command:
add ip udp_bcast_forwarding_port 40001
To display the status of UDP broadcast forwarding, use the following
command:
show ip udp_broadcast_forwarding
To list the UDP broadcast forwarding ports, use the following command:
list ip udp_bcast_forwarding_port
P
ROTOCOL