Sony PDW-HD1550 Service Manual page 80

Professional disc recorder
Hide thumbs Also See for PDW-HD1550:
Table of Contents

Advertisement

• Authentication Trap ": on"
Monitoring System
192.168.0.1
192.168.0.2
Manager-1
Manager-2
Read Community : public
Write Community : private
Trap Community : public
The system information of MIB-2 can be set on the SNMP page of the Maintenance menu.
The information is defined by the system group of MIB-2, and the settings are referred to from the SNMP manager.
The settings are used for system control, and will not affect the operations of XDCAM.
When monitoring the network consisting of multiple units of XDCAM or multiple devices with MIB-2 installed,
individual devices can be identified based on this information.
SNMP MIB-2 Variables
sysDescr
PDW-HD1550
sysObject
.1.3.6.1.4.1.122.8501
sysContact
sysName
sysLocation
Status
Item
Setting
sysDescr
Display only
sysObject
Display only
sysContact
ASCII character only
sysName
ASCII character only
sysLocaton
ASCII character only
Status
ASCII character only
Procedure
1.
Set the MIB-2 system information. (sysContact, sysName, sysLocation)
2.
Save the setting by pressing "Execute".
Check that "OK" is displayed in the Status field.
Note
The setting is effective after the power is turned on again.
To revert the setting, press "Reset".
*1:
Up to 32 characters can be entered for each item.
sysContact, sysName, sysLocation can be set from the SNMP manager as well. Up to 32 characters can be entered in this
case, too.
Chinese characters cannot be entered.
PDW-HD1550
Trap
Monitored System
Receiving System
192.168.0.3
192.168.0.4
Manager-3
Agent-1
Trap
Community : public
Function
Displays the model name
Displays the object identifier
*1
In general, sets the information such as device manager or contact (ex. Phone
numbers, e-mail addresses, etc.)
In general, sets the device name (ex: "XDCAM-002", etc.)
*1
*1
In general, sets the location where the device is installed (ex. "Studio-A", etc.)
OK: Displayed when the data is saved correctly.
*1
Note
When "NG" is displayed, check the entered characters.
192.168.0.6
Agent-3
192.168.0.5
Agent-2
3-8

Advertisement

Table of Contents
loading

Table of Contents