1. Manuals
  2. Brands
  3. Sony Manuals
  4. CD Player
  5. XDCAM PDW-R1
  6. Operation manual

Sony PDW-R1 Operation Manual

Sony professional disc recorder operation manual pdw-r1
Hide thumbs Also See for PDW-R1:
Table of Contents

Advertisement

Quick Links

PROFESSIONAL DISC RECORDER
PDW-R1
OPERATION MANUAL
1st Edition (Revised 1)
[English]

Advertisement

Table of Contents
loading

Related Manuals for Sony PDW-R1

Summary of Contents for Sony PDW-R1

  • Page 1 PROFESSIONAL DISC RECORDER PDW-R1 OPERATION MANUAL 1st Edition (Revised 1) [English]...

  • Page 2: Important Safety Instructions

    Important Safety Instructions • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  • Page 3 If you have questions on the use of the above Power Cord/ Appliance Connector/Plug, please consult a qualified service personnel. When installing the installation space must be secured in consideration of the ventilation and service operation. • Do not block the ventilation slots at the left side and right side panels, and vents of the fans.
  • Page 4 For the customers in the USA and Canada RECYCLING LITHIUM-ION BATTERIES Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/ Caution: Do not handle damaged or leaking lithium-ion...

  • Page 5: Table Of Contents

    Table of Contents Before Using the Unit ... 7 Setting the Line Mode ...7 Chapter 1 Overview 1-1 Features ... 9 Chapter 2 Names and Functions of Parts 2-1 Configuration ... 11 2-2 Control Panel... 12 2-3 LCD Panel ... 17 2-4 Connectors ...
  • Page 6 6-1-3 Assigning User-Defined Clip Titles 75 6-1-4 Assigning User-Defined Clip and Clip List Names ...76 6-2 File Access Mode File Operations... 78 6-2-1 Making FAM Connections ...78 6-2-2 Operating on Files ...79 6-2-3 Exiting File Operations...79 6-3 FTP File Operations ... 80 6-3-1 Making FTP Connections ...

  • Page 7: Before Using The Unit

    Before Using the Unit Setting the Line Mode This unit is shipped with the line mode still unset. Therefore you need to set the line mode before using the unit. (The unit cannot be used unless the line mode is set.) Once it is set, the line mode is retained even when the unit is powered off.
  • Page 8 Item Item name Settings 525 (U)/525 (J) Basic menu CHARACTER 00 to 0A to 2A H-POSITION CHARACTER 00 to 2E to 38 V-POSITION Extended menu VITC 12H to 16H to POSITION SEL-1 VITC 12H to 18H to POSITION SEL-2 DF MODE Item UMID SDI 12 H to 17 H to...

  • Page 9: Chapter 1 Overview

    ±20 times normal speed. IT-friendly system In the PDW-R1, clips are recorded as video and audio data files . This file-based recording system also allows material to be viewed directly on a computer linked to the unit via an i.LINK (file access mode, called FAM below)
  • Page 10 Compact size, lightweight and battery- powered operation The PDW-R1 is designed small and light enough to carry out to the field and it is operable with battery to work speedily in the field.

  • Page 11: Chapter 2 Names And Functions Of

    Names and Functions of 2-1 Configuration Operation of the PDW-R1 uses the parts shown in the following figure. Security slot You can fit a commercially available security cable into this slot. Battery pack shoe (covered) (see page 33) a) For information about how to use your security cable, refer to the instructions provided with the security cable.

  • Page 12: Control Panel

    ) switch and indicator When the AC power switch on the rear panel is in the " position, or a battery is loaded, this switches the PDW-R1 between the operating (") and standby (1) states. When the switch is moved to the " position, the indicator lights.
  • Page 13 1 Time data settings section 1 INT/EXT/RP188 switch 2 PRESET/REGEN switch 3 F-RUN/R-RUNswitch COUNTER PRESET F-RUN RP188 REGEN R-RUN 4 COUNTER SEL button 5 HOLD button a INT/EXT/RP188 (internal/external/RP188 selector) switch Before recording time code, select the type of time code with this switch.

  • Page 14: Menu Button

    each clip or sub-clip appear. Press once more to turn the button off, and return to a whole-screen display. To display the thumbnails of essence mark frames (frames with an essence mark attached), hold down the SHIFT button, and press this button. The essence mark selection menu appears.
  • Page 15 speed varies in the range ±1 times normal speed, according to the rotation rate of the jog dial. There are no detents. Normally, you press the JOG button before turning the jog dial, but it is also possible to make a setting to enable jog mode directly by turning the dial (set extended menu item 101 “SELECTION FOR SEARCH DIAL ENABLE”...
  • Page 16 5 Recording and playback control section 1 PREV button 2 PLAY button 3 NEXT button PREV PLAY NEXT STOP F REV F FWD 4 STOP button 5 REC button a PREV (previous) button Press this button, turning it on, to show the first frame of the current clip.

  • Page 17: Lcd Panel

    A status screen appears here when you press the STATUS button (see page 19). c WARNING indicator This lights when condensation within the PDW-R1, a laser diode fault, or another hardware error is detected. It goes off when the error state is cleared. When this indicator is lit, the time data display and video panel show an error message.
  • Page 18 • When extended menu item 310 “REC INHIBIT” is set to “on.” • The format of the recorded part of the disc does not match the settings of the PDW-R1 (number of recorded channels, TV system (525/625 selection), and recording format (DVCAM/IMX50/IMX40/IMX30 selection)).
  • Page 19 “BATT” and “E” flashing: Exhausted (charging required). Operation of the PDW-R1 stops. e Disc loaded mark This lights while a disc is loaded in the PDW-R1. It flashes as the disc is inserted, and while it is being ejected. 2 Audio and video settings section...
  • Page 20 Item Description PROC This appears when at least 1 video processing parameter has been set to “VAR (VARIABLE).” The line mode of the current clip on the DISC disc (setting values: 525, 625), the video recording format (setting values: IMX50, IMX40, IMX30, DVCAM), and the number of audio recording channels (setting values: 8ch, 4ch) When the remote control switch is set...

  • Page 21: Connectors

    2-4 Connectors Front PHONES Right side 2 DC OUT 12V connector 3 REMOTE connector REMOTE DC OUT 12V VIDEO S400 OUT1 3 Analog video signal inputs/outputs (see page 23) S400 (i.LINK) connector (network) connector a PHONES jack and LEVEL knob The jack is a standard stereo jack.
  • Page 22 • When the PDW-R1 is connected to a device with a 6-pin i.LINK connector by an i.LINK cable, before unplugging the i.LINK cable, first power off the device and disconnect the power plug from the outlet.
  • Page 23 To treat the input and output signals of these connectors as non-audio signals, set the maintenance menu item “AUDIO CONFIG”-“NON-AUDIO INPUT” (recording) and extended menu item 823 “NON-AUDIO FLAG PB” (playback). See 7-3-2 “Extended Menu Operations” (page 108) for more information about how to make extended menu settings.

  • Page 24: Power Supply Section

    TC OUT connector (BNC type) This outputs the following time code, depending on the operating state of the PDW-R1. During playback: playback time code During recording: the time code from the internal time code generator or the time code input to the TC IN connector.

  • Page 25: Chapter 3 Preparations

    Sony sales representative. 3-1-1 Connecting an External Monitor Connecting a Sony LCD monitor to the VIDEO OUT 1, VIDEO OUT 2 (SUPER), or SDI OUT (SUPER) connector of this unit enables you to see the output video on the monitor screen.
  • Page 26 The following shows an example of an FTP (File Transfer Protocol) connection. Note To use PDZ-1 requires the PDW-R1 IP address and other network-related settings to be made beforehand. For details of the network-related settings, see “To change network settings” (page 115).

  • Page 27: Connecting To A Nonlinear Editing

    1: i.LINK cable (not supplied) PDW-R1 REMOTE REF VIDEO IN DIGITAL AUDIO (AES/EBU) DC OUT 12V VIDEO S400 OUT1 OUT2(SUPER) OUT(SUPER) S400 (i.LINK) To i.LINK (IEEE1394) connector Laptop computer Make sure extended menu item 215 “i.LINK MODE” is set to “FAM (PC REMOTE).”...
  • Page 28 REC TRIGGER switch: INT ONLY “REC FORMAT” on the VTR MODE page of the MAINTENANCE menu: DVCAM PDW-R1 settings Remote control switch (see page 12): REMOTE VIDEO INPUT SEL button (see page 19): select i.LINK Basic menu item 031 “RECORDING FORMAT”: DVCAM Extended menu item 214 “REMOTE INTERFACE”: i.LINK...

  • Page 29: Connections For Cut Editing

    REMOTE (player) PDW-R1 PLAYER-1 Reference video signal PDW-R1 (player) settings Remote control switch (see page 12): REMOTE Extended menu item 214 “REMOTE INTERFACE”: 9PIN Extended menu item 820 “AUDIO OUTPUT CH1/CH2 SELECT”: moni a) Use an XLR/pin converter plug (not supplied) as required.
  • Page 30 OUT(SUPER) REMOTE SDI OUT (SUPER) PDW-R1 (player) PDW-R1 (player) settings Remote control switch (see page 12): REMOTE Extended menu item 214 “REMOTE INTERFACE”: 9PIN Extended menu item 820 “AUDIO OUTPUT CH1/CH2 SELECT”: moni a) Use an XLR/pin converter plug (not supplied) as required.

  • Page 31: Using The Rm-280 Editing

    OUT2(SUPER) OUT(SUPER) S400 (i.LINK) (player) PDW-R1 PDW-R1 (player) settings Remote control switch (see page 12): REMOTE Extended menu item 214 “REMOTE INTERFACE”: i.LINK Extended menu item 820 “AUDIO OUTPUT CH1/CH2 SELECT”: moni a) Use an XLR/pin converter plug (not supplied) as required.

  • Page 32: Editing Control Unit Settings

    Setup menu item 19 “FNC MODE”: XDCAM For information about function assignments to PF keys in XDCAM mode, refer to the Operation Manual for the RM- 280. PDW-R1 settings Remote control switch (see page 12): REMOTE Extended menu item 214 “REMOTE INTERFACE”: 9PIN...

  • Page 33: Power Preparations

    3-2 Power Preparations This unit can be powered by a battery pack, DC power, or AC power. 3-2-1 Using AC Power Connect an AC power source (100 V to 240 V AC, 50/60 Hz) to the ~ AC IN connector on the right side of the unit with an AC power cord (not supplied, see page 133).

  • Page 34: Setup

    3-3 Setup The principal setup operations before operating this unit can be carried out using setup menus. The setup menus of this unit comprise a basic setup menu and an extended setup menu. The contents of these menus are as follows. Basic setup menu: •...

  • Page 35: Superimposed Text Information

    Note The time zone is reset to the factory default when you execute the maintenance menu item “RESET ALL SETUP.” You will need to set it again. The date and time are not reset. 3-5 Superimposed Text Information The video signal output from the VIDEO OUT 2 (SUPER) connector or the SDI OUT (SUPER) connector contains superimposed text information, including time code, menu settings, and alarm messages.
  • Page 36 a Type of time data Display Meaning Counter data TC reader time code data TC reader user bits data TCR. VITC reader time code UBR. VITC reader user bits data TC generator time code TC generator user bits data IN point time data OUT point time data Duration between IN point and OUT point...
  • Page 37 Display Name Description Green condition There is no problem with the playback condition. This unit and the disc can be used just as they are. This corresponds to the “green” channel condition indicator of a VTR. Yellow condition The playback condition has deteriorated to some degree.

  • Page 38: Handling Discs

    3-6-1 Discs Used for Recording and Playback This disc recorder uses the following disc for recording and playback: PFD23 Professional Disc 1) Professional Disc is a trademark of Sony Corporation. Note It is not possible to use the following discs for recording or playback: •...

  • Page 39: Formatting A Disc

    If message “HUMID!” appears in the time data display There is moisture condensation in the unit. For the steps to take when the message appears, see 8-2 “Condensation” (page 121). 3-6-5 Formatting a Disc An unused disc requires no formatting operation. The disc is automatically formatted when loaded into this unit.

  • Page 40: Handling Of Discs When Recording

    The disc is ejected. After removing the disc, you do not need to return the screw to its original position. Normal operation will resume when the unit is powered on again. Close the rubber cover firmly. 3-6-7 Handling of Discs When Recording Does Not End Normally (Salvage Function) Recording processing does not end normally when the...
  • Page 41 To exit without salvaging Press the RESET button. The state of section where recording was interrupted is saved, but no salvage processing is done. Sections which were recorded normally can be played back, but no new recording can be done on the disc. (A quick format can be done on the disc, although all of its contents will be lost.) Note...

  • Page 42: Chapter 4 Recording/Playback

    Recording/Playback 4-1 Recording This section describes video and audio recording on the unit. 4-1-1 Preparations for Recording Button/switch settings Before beginning recording, make any necessary button/ switch settings. For details of the settings of the buttons/switches, see the pages indicated in parenthesis. DATA DATA DATA...
  • Page 43 To set the video recording format Use basic menu item 031 “RECORDING FORMAT” to select the video recording format from MPEG IMX 50 Mbps, MPEG IMX 40 Mbps, MPEG IMX 30 Mbps, and DVCAM. The factory default setting is IMX50. For details of the basic menu operations, see 7-2-2 “Basic Menu Operations”...

  • Page 44: Recording Time Code And User Bit Values

    4-1-2 Recording Time Code and User Bit Values There are the following four ways of recording time code: • Internal Preset mode, which records the output of the internal time code generator, set beforehand to an initial value. The following run modes can be selected. - Free Run: Time code advances continually.
  • Page 45 Time data display DATA DATA DATA DATA OVER OVER OVER OVER VITC VIUB COUNTER HOLD VITC EXT-LK HOURS MINUTES SECONDS FRAMES DISC CH- 15 CH- 26 CH- 37 CH- 48 BATT PROCESS AUDIO VIDEO CONTROL INPUT CH INPUT SEL INPUT SEL STATUS CHARACTER LIGHT...
  • Page 46 To record time code that follows sequentially upon the last recorded time code You can record time code so that it is continuous from one clip to the next on the disc. Set the INT/EXT/RP188 switch to INT and the PRESET/ REGEN switch to REGEN beforehand.
  • Page 47 To synchronize to time code input to the TC IN connector • Set the INT/EXT/RP188 switch to EXT and the PRESET/REGEN switch to REGEN. • Set extended menu item 629 “TC SELECT” to “tc.” To synchronize to VITC in an input video signal •...

  • Page 48: Recording Operation

    To directly record SMPTE RP-188 LTC in an SDI signal Connect an SDI signal containing SMPTE RP188 LTC to the SDI IN connector. Press the VIDEO INPUT SEL button and, while viewing the time data display or the video panel, select SDI. Set the PRESET/REGEN switch to PRESET, and set the INT/EXT/RP188 to one of the following.

  • Page 49: Playback

    4-2 Playback This section describes playback of video and audio. Disc playback start position Although this unit uses optical discs, it is designed to offer the most convenient features of tape playback by VTRs. One of these is the playback start position, which works in the same way as tape, as described below.
  • Page 50 Video panel DATA DATA DATA DATA VITC VIUB COUNTER HOLD VITC OVER OVER OVER OVER EXT-LK HOURS MINUTES SECONDS FRAMES DISC CH- 15 CH- 26 CH- 37 CH- 48 BATT PROCESS AUDIO CONTROL VIDEO INPUT CH INPUT SEL INPUT SEL STATUS CHARACTER LIGHT...

  • Page 51: Playback Operation

    If you selected “VAR” in step 2, set the parameter value by holding down the corresponding button and rotating the jog dial, while viewing the video. Setting values vary with the rotation speed of the jog dial. Repeat steps 2 and 3 as required to set other parameters.

  • Page 52: Thumbnail Search

    setting), just turning the jog dial with the JOG button off starts playback in jog mode. Playback in shuttle mode In shuttle mode, you can control the speed of playback by the angular position of the shuttle dial. The range of playback speed is ±20 times normal speed.
  • Page 53 Press the THUMBNAIL button, turning it off. Use the arrow buttons or the jog dial to select the desired clip. You can select clips with the following operations. Press the PREV or NEXT button: Move to the previous or next clip. Press the PREV or NEXT button with the SHIFT button held down: Move to the first or last clip.

  • Page 54: Clip List Playback

    4-2-4 Clip List Playback You can play back clips in the order of clip lists created with the scene selection function (see page 58). Playing back in clip list order Proceed as follows. If the clip list that you want to play exists on the disc, load it into the current clip list.

  • Page 55: Locking And Deleting Clips

    To perform repeat playback, set extended menu item 142 “REPEAT MODE” to “play,” and then proceed as follows. Insert a disc. To perform repeat playback for normal playback, proceed to step 3. To perform repeat playback for clip list playback, press the SUBCLIP button.

  • Page 56: Deleting Clips

    You return to the thumbnail screen, and a lock icon appears on the thumbnail of the selected clip to show that it is locked. Lock icon Locked clips cannot be deleted or renamed. Unlock the clip if you want to perform any of these operations. To lock clips without displaying the THUMBNAIL MENU After carrying out step 2 in the procedure, press the STOP...
  • Page 57 When the target clip is referenced in a clip list: “DELETE CLIP & CLIP LIST?” (The clip list that references the clip will also be deleted.) To go to the clip deletion screen without displaying the THUMBNAIL MENU After step 2, press the RESET button with the SHIFT button held down (shortcut operation).

  • Page 58: Chapter 5 Scene Selection

    Scene Selection 5-1 Overview What is scene selection? Scene selection is a function which allows you to select material (clips) from the material recorded on a disc and perform cut editing. You can do this by operating on this unit only. •...
  • Page 59 Clip 3 Clip 4 Select clips Recorded material Clip 1 Clip list 1 Clip 2 Clip 3 clip 1 Play back clip list PDW-R1 PDW-R1 clip 1 clip 3 clip 2 Clip list 1 Disc clip 2 clip 3 5-1 Overview...
  • Page 60 Clips Material recorded on a disc with this unit is managed in units called “clips.” A clip contains the material between a recording start point (In point) and a recording end point (Out point). Clips have names beginning with “C” for example “C0001.”...

  • Page 61: Creating Clip Lists

    Unit memory Current clip list t Clip list playback Can be edited (adding, deleting, and thumbnail and reordering sub clips) display SAVE M LOAD Disc C0001 (Clip 1) E0001 (Clip list 1) C0002 (Clip 2) E0002 (Clip list 2) C0003 (Clip 3) E0003 (Clip list 3) E0099 (Clip list 99) Clip list playback...
  • Page 62 Use the arrow buttons or the jog dial to select the desired clip. You can also select clips with the following operations. Press the PREV or NEXT button: Moves to the previous or next clip. Press the PREV or NEXT button with the SHIFT button held down: Moves to the first or last clip.

  • Page 63: Reordering Sub Clips

    To search Use the jog and shuttle dials. At the point you want to set as the In point, hold down the G/IN button and press the SET button. An In point is set, and the IN indicator lights. In the same way, search for the point you want to set as the Out point, and then hold down the g/OUT button and press the SET button.
  • Page 64 Load the clip list from the disc into the unit memory (see page 68). To return to the full-screen display Press the THUMBNAIL button, turning it on. Use the arrow buttons or the jog dial to select the desired sub clip. You can also select sub clips with the following operations.

  • Page 65: Trimming Sub Clips

    5-2-3 Trimming Sub Clips SET button THUMBNAIL button SHIFT button RESET button SHUTTLE THUMB KEY INHI COUNTER CLIP NAIL SHIFT HOLD PRESET F-RUN NETWORK LOCAL ACCESS REMOTE RP188 REGEN R-RUN CLIP ESSENCE MENU MARK ALL/CH-1 CH-2 CH-3 CH-4 METER MONITOR VARIABLE MENU RESET...

  • Page 66: Deleting Sub Clips

    5-2-4 Deleting Sub Clips SET button RESET button THUMB KEY INHI COUNTER CLIP NAIL SHIFT HOLD NETWORK PRESET F-RUN LOCAL ACCESS REMOTE RP188 REGEN R-RUN CLIP ESSENCE MENU MARK ALL/CH-1 CH-2 CH-3 CH-4 METER MONITOR VARIABLE MENU RESET PRESET L/ST/R SYSTEM S.SEL AUDIO...
  • Page 67 SET button SHUTTLE THUMB COUNTER KEY INHI CLIP NAIL SHIFT HOLD PRESET F-RUN NETWORK LOCAL ACCESS REMOTE RP188 REGEN R-RUN CLIP ESSENCE MENU MARK ALL/CH-1 CH-2 CH-3 CH-4 METER MONITOR VARIABLE MENU RESET PRESET L/ST/R SYSTEM S.SEL AUDIO MENU MARK1 PREV PLAY NEXT...

  • Page 68: Managing Clip Lists (Clip Menu)

    5-3 Managing Clip Lists (CLIP Menu) After you create a clip list, you can use the CLIP menu to save it to disc, load it from disc into the unit memory, and delete it from the disc. The CLIP menu also allows you to clear and edit the current clip list.

  • Page 69: Deleting Clip Lists From A Disc

    Use the F or f button or the jog dial to select the desired clip list, and then press the g button A confirmation message like the one shown below appears. LOAD CLIP LIST LOAD E0002 OK ? LOAD : SET KEY TO MENU : MENU KEY...

  • Page 70: Sorting Clip Lists

    “00:00.00.00.” You can set the initial time code to any value. Load an existing clip list for which you want to set the initial time code into to the unit memory as the current clip list. For details, see 5-3-1 “Loading a Clip List From Disc Into Unit Memory”...

  • Page 71: Using Pdz-1 Proxy Browsing Software

    5-4 Using PDZ-1 Proxy Browsing Software When a computer with the PDZ-1 Proxy Browsing Software installed is connected to this unit, you can transfer the proxy AV data and metadata files recorded on a disc to the computer. On the computer side, PDZ-1 enables you to browse the proxy AV data, add or modify metadata (titles, comments, essence marks, etc.), or create a clip list.

  • Page 72: Chapter 6 File Operations

    File Operations 6-1 Overview A remote computer can be connected to this unit and used to operate on recorded data which has been saved in data files, such as video and audio data files. There are two ways to connect a remote computer. •...

  • Page 73: File Operation Restrictions

    6-1-2 File Operation Restrictions This section explains which operations are possible on files stored in each directory. When required, the following operation tables distinguish reading and overwriting from partial reading and overwriting. Read: Read data sequentially from the start to the end of the file.
  • Page 74 h) When a C*.MXF file is deleted, the C*M01.XML file with the same name in the “C*” part is also deleted automatically. Notes • Directories cannot be created in the Clip directory. • When the following operations, supported by version 1.5 and higher XDCAM devices, are carried out on a disc, then it becomes impossible for version 1.4x and lower XDCAM devices to record new clips or delete existing...
  • Page 75 General directory File name Content Any file a) UTF-8 file names can be up to 63 bytes in length. (Depending on the character type, file names (including extension) may be limited to 21 characters.) b) Only when the write inhibit tab on the disc is set to enable recording, and when extended menu item 310 “REC INHIBIT”...

  • Page 76: Assigning User-Defined Clip And Clip List Names

    With the STOP button held down, rotate the jog or shuttle dial to move the asterisk (*) on the left of the menu items to “TITLE.” The asterisk indicates the selected item. With the SHUTTLE button held down, rotate the jog or shuttle dial to select “enable.”...
  • Page 77 C0001.MXF TITLE00001 When the “AUTO NAMING” sub item of basic menu item 036 is set to “C****” TITLE00001.MXF TITLE00001 When the “AUTO NAMING” sub item of basic menu item 036 is set to “title” Before you start, set the “TITLE” sub item of basic menu item 035 “CLIP TITLE NAMING SELECT”...

  • Page 78: File Access Mode File Operations

    - The user-defined name or standard format name is displayed for clips without a title. • If the firmware of your XDCAM device is version 1.4x or lower, clips with user-defined names appear as “C5000” to “C9999,” in order of recording. 6-2 File Access Mode File Operations 6-2 File Access Mode File Operations...

  • Page 79: Operating On Files

    • Windows 2000: The Unplug or Eject Hardware dialog appears. • Windows XP: The Safely Remove Hardware dialog appears. Select “Sony XDCAM PDW-R1 IEEE 1394 SBP2 Device” and click Stop. The Stop a Hardware device dialog appears. Select “Sony XDCAM PDW-R1 IEEE 1394 SBP2 Device”...

  • Page 80: Ftp File Operations

    To disable FAM connections Execute one of the procedures described in the previous section “Reconnecting” to make a FAM connection between this unit and the remote computer. To disable FAM connections, set extended menu item 215 “i.LINK MODE” to “AV/C.” For more information about how to make this setting, see 7-3-2 “Extended Menu Operations”...
  • Page 81 When the user name is verified, you are prompted to enter a password. Enter the password and press the Enter key. The password is set to “pdw-r1” when the unit is shipped from the factory. The login is complete when the password is verified.

  • Page 82: Command List

    Enter key. Command syntax USER <SP> <username> <CRLF> Input example: USER admin PASS <SP> <password> <CRLF> Input example: PASS pdw-r1 QUIT <CRLF> PORT <SP> <h1,h2,h3,h4,p1,p2> <CRLF> • h1 (most significant byte) to h4 (least significant byte): IP address •...
  • Page 83 Command name Description STRU Specifies the data structure. MODE Specifies the transfer mode. LIST Sends a list of files from this unit to the remote computer. NLST Sends a list of file names from this unit to the remote computer, with no other information.
  • Page 84 Command name Description STOR Begins transfer of a copy of a file in the specified path on the remote computer to the current directory on this unit. Depending on the type of file transferred, the following files are created. • C*.MXF file - C*M01.XML file (metadata) - C*S01.MXF file (proxy AV data) •...
  • Page 85 Command name Description STAT Sends information about properties of the specified file, or about data transfer status, from this unit to the remote computer. The following property information is sent, depending on the file type. • MXF file - File name - File type - CODEC type - Frame rate...
  • Page 86 Extended commands The following table shows the extended FTP commands supported by this unit. Command name Description SITE REPF Sends an MXF file from the specified path on this unit to the remote computer. This command allows you to specify a segment in the body of the MXF file (composed of video and audio data), for transfer of the required segment only.
  • Page 87 Command name Description Locks and unlocks clips. Also sets SITE CHMOD permissions for directories and files in the General directory. a) This is supported from firmware version 1.5. Command syntax SITE CHMOD <SP> <flag> <SP> <path-name> <CRLF> Specify one of the following values in <flag>, according to the specification in <path-name>.

  • Page 88: Recording Continuous Time Code With Fam And Ftp Connections

    6-4 Recording Continuous Time Code With FAM and FTP Connections When you are connected to the unit by FAM or FTP, you can create new clips with time code that is continuous with the time code of the last frame of the last clip on the disc. To record continuous time code, first set the INT/EXT/ RP188 switch to INT, set the PRESET/REGEN switch to REGEN, and set extended menu item 629 “TC SELECT”...

  • Page 89: Menu System Configuration

    7-1 Menu System Configuration The settings for this unit use the following menus. • Setup menu See the next item. • Maintenance menu This provides audio control, and network and setup menu settings, and also shows version information. For details, see 7-4 “Maintenance Menu” (page 112). •...

  • Page 90: Basic Setup Menu

    7-2 Basic Setup Menu 7-2-1 Items in the Basic Setup Menu The basic menu items (excluding the items related to the digital hours meter) are listed in the following table. • Item names are the names which appear in the video panel and on an external monitor, when the input signals to the monitor are the video signals output from the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER)
  • Page 91 Item number Item name LOCAL FUNCTION ENABLE TAPE TIMER DISPLAY CHARACTER TYPE CHARACTER V-SIZE CONDITION DISPLAY ON VIDEO MONITOR 525/625 SYSTEM SELECT LCD CHARACTER TYPE Settings Determine which recording and playback control buttons on the control panel are enabled when this unit is controlled from external equipment. dis (all disable): All buttons and switches are disabled.
  • Page 92 Item number Item name ALARM DISPLAY SUB STATUS DISPLAY SELECT Determine the kind of sub status information to be displayed on the MENU CHARACTER TYPE STORED OWNERSHIP RECORDING FORMAT LCD MONITOR MODE MENU STATUS DISPLAY ON VIDEO MONITOR 7-2 Basic Setup Menu Settings Select whether or not to display alarm messages.
  • Page 93 Item number Item name CLIP TITLE NAMING SELECT Sub-item TITLE PREFIX NUMERIC FILE NAMING Sub-item NAMING FORM AUTO NAMING RECALL SETUP BANK-1 RECALL SETUP BANK-2 RECALL SETUP BANK-3 SAVE SETUP BANK-1 SAVE SETUP BANK-2 SAVE SETUP BANK-3 RESET SETUP MENU a) This is supported from firmware version 1.5.

  • Page 94: Basic Menu Operations

    7-2-2 Basic Menu Operations Basic setup menu operations This section explains how to select setup menu items and how to change their values. The operations are common to both the basic menu and the extended menu. Time data display Video panel DATA DATA DATA...
  • Page 95 Display in video panel and on external monitor Cursor indicating the currently selected sub-item ITEM-703 BLANK LINE SELECT ALL LINE LINE 12 Display in time data display Sub-item number (flashing while changing) With the SHUTTLE button held down, rotate the jog dial or shuttle dial to change the setting.
  • Page 96 Hold down the SHUTTLE button, and turn the jog dial or shuttle dial to set menu item 013 to “on.” Press the SET button. Hold down the SHUTTLE button, and turn the jog dial or shuttle dial to select the line mode 525(U), 525(J) or 625.

  • Page 97: Extended Menu

    7-3 Extended Menu 7-3-1 Items in the Extended Menu The following tables show the items in the extended menu. • Item names are the names which appear in the video panel, and on an external monitor to which the output of the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER) connector is input.
  • Page 98 Item number Item name AUDIO VOLUME REPEAT MODE INDEX PICTURE POSITION MODE KEY ENABLE DURING RECORDING POWER SAVE MODE Menu items in the 200s, relating to the remote control interface Item number Item name REMOTE INTERFACE i.LINK MODE PARALLEL RECORDING MODE NETWORK ENABLE 7-3 Extended Menu Menu items in the 100s, relating to the control panels...
  • Page 99 Menu items in the 200s, relating to the remote control interface Item number Item name LIVE LOGGING Menu items in the 300s, relating to editing operations Item number Item name SELECTION OF STD/NON-STD FOR COMPOSITE VIDEO IN REC INHIBIT DIGITAL AUDIO PB PROCESS ON EDIT POINT OUTPUT REFERENCE SEL Settings...
  • Page 100 External synchronization to reference signal generators The internal reference signal generator is synchronized either to a reference signal input to the REF VIDEO IN connector or an input video signal. Depending on the settings of extended menu items 335 and 308, and the input VIDEO INPUT SEL button setting Item 335 setting Item 308 setting...
  • Page 101 Menu items in the 500s, relating to disc protection Item number Item name STILL TIMER Menu items in the 600s, relating to the time code, metadata, and UMID Item number Item name VITC POSITION SEL-1 VITC POSITION SEL-2 TCG REGEN MODE U-BIT BINARY GROUP FLAG Settings To protect the disc against shock and vibrations, and to lengthen the life...
  • Page 102 Menu items in the 600s, relating to the time code, metadata, and UMID Item number Item name TC OUTPUT PHASE IN EE MODE TC OUTPUT MUTING IN SEARCH MODE VITC DF MODE TC SELECT TC UBIT SELECT VITC UBIT SELECT WATCH AUTO ADJUST UMID SDI OUTPUT 7-3 Extended Menu...
  • Page 103 Menu items in the 600s, relating to the time code, metadata, and UMID Item number Item name UMID SDI VANC LINE ESSENCE MARK SDI OUTPUT ESSENCE MARK SDI VANC LINE Menu items in the 700s, relating to video control Item Item name number SELECTION OF VIDEO/SYNC...
  • Page 104 Item Item name number BLANK LINE SELECT Sub-item ALL LINE 2 ... LINE 12 ... LINE 19 LINE 20 2 ... LINE 12 ... LINE 20 LINE 21 2 ... LINE 9, 322 ... LINE 22, LINE 23 EDGE SUBCARRIER REDUCER MODE FORCED VERTICAL INTERPOLATION OFF...
  • Page 105 Menu items in the 700s, relating to video control Item Item name number VIDEO SETUP REFERENCE Sub-item INPUT LEVEL OUTPUT LEVEL INPUT VIDEO BLANK Sub-item ALL LINE 2 ... LINE 12 ... In 525(U)/ LINE 20 525(J) line modes 2 ... LINE 9, 322 In 625 line mode...
  • Page 106 Item Item name number WIDE MODE Sub-item INPUT OUTPUT Item number Item name DIGITAL AUDIO MUTING IN SHUTTLE MODE AUDIO OUTPUT PHASE INTERNAL AUDIO SIGNAL GENERATOR AUDIO SAMPLING RATE CONVERTER AUDIO OUTPUT CH1/CH2 SELECT Select the signals to be output from the AUDIO OUT 1/3 and AUDIO 7-3 Extended Menu Menu items in the 700s, relating to video control Settings...
  • Page 107 Menu items in the 800s, relating to audio control Item number Item name NON-AUDIO FLAG PB Sub-item CH1/CH2 CH3/CH4 CH5/CH6 CH7/CH8 ANALOG LINE OUTPUT SELECT AES/EBU AUDIO OUTPUT SELECT Select the audio signals to assign to AES/EBU audio output channels. Sub-item CH1/CH2 CH3/CH4...

  • Page 108: Extended Menu Operations

    Item number Item name AUDIO MONITOR CHANNEL ARRANGE Sub-item L-5 Lch/tr5 L-6 Lch/tr6 L-7 Lch/tr7 L-8 Lch/tr8 R-5 Rch/tr5 R-6 Rch/tr6 R-7 Rch/tr7 R-8 Rch/tr8 Item number Item name SD-SDI H-ANC CONTROL Sub-item AUDIO 5CH-8CH RP188 ATC 7-3-2 Extended Menu Operations The extended menu can be used with the same procedures as in the basic menu.

  • Page 109: Using Umid Data

    Set this switch to “ON.” Replace the cover. Note Tighten the screws firmly. To enable extended menu display in the maintenance menu The menu screens in the following procedure are those that appear in the video panel, and on a monitor to which the output of the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER) connector is input.
  • Page 110 What is a UMID? The UMID (Unique Material Identifier) is a unique identifier for audio-visual material defined by the SMPTE330M-2003 standard. Basic UMID (32 bytes) Universal label 12 bytes Globally unique ID is automatically recorded in clip units. The Extended UMID is metadata that provides additional information such as location, time/date, company and so Instance No.
  • Page 111 Set the following item. Item Contents COUNTRY Country code ORGANIZATION Organization code USER User code To change the currently selected item Hold down the STOP button, and turn the jog dial or shuttle dial. To select a different digit to be changed Turn the jog dial or shuttle dial.

  • Page 112: Maintenance Menu

    7-4 Maintenance Menu 7-4-1 Items in the Maintenance Menu The following tables show the items in the maintenance menu. • Item names are the names which appear in the video panel, and on an external monitor to which the output of the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER) connector is input.
  • Page 113 NETWORK CONFIG: items relating to network settings Item Setting SUBNET MASK PRESET Set the subnet mask. 255.255.255.000 Note When DHCP is set to “ENABLE,” it is not possible to set the subnet mask. DEFAULT GATEWAY PRESET Set the default gateway. 000.000.000.000 Note When DHCP is set to “ENABLE,”...

  • Page 114: Maintenance Menu Operations

    Item SDI SUPER For details about OTHERS items other than the above, refer to the Maintenance Manual. 7-4-2 Maintenance Menu Operations Basic maintenance menu operations The following explains how to select maintenance menu items and how to change their values. The menu screen shown are those that appear in the video panel and on a monitor to which the output of the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER) connector is input.
  • Page 115 Press the g button. A lower-level menu (setting modification screen) appears. The current setting is highlighted, and the arrow (C) flashes to indicate that you can move to a higher-level menu. If the current setting is the factory default, a colon (:) appears between the item name and the setting.
  • Page 116 Using the F/f buttons to select “IP ADDRESS.” Press the g button. The IP ADDRESS PRESET menu appears, and the digit that can be changed flashes. Item selection screen Flashing IP ADDRESS PRESET : 192.168.001.010 DHCP: disable SHIFT : ( INC/DEC : CLEAR : RESET KEY DATA SET :...

  • Page 117: System Menu

    7-5 System Menu 7-5-1 Items in the System Menu The following tables show the items in the system menu. Item names are the names which appear in the video panel, and on an external monitor to which the output of the Item Setting STATUS...
  • Page 118 CLIP STATUS CLIP NO 001/010 NAME : C0001 TITLE: (no name) RECORD DEVICE: PDW-R1 SERIAL: 10001 DATE 01/01/06 TIME 19:54:38 TO MENU : MENU KEY 7-5 System Menu To return to the previous menu page Press the MENU button.
  • Page 119 To set the date and time See 3-4 “Setting the Date and Time” (page 34). 7-5 System Menu...

  • Page 120: Chapter 8 Maintenance And Troubleshooting

    VIDEO OUT 2 (SUPER)/SDI OUT (SUPER) connector is input. Use the information as a guide in scheduling periodic maintenance. For periodic maintenance, consult your Sony dealer. Display modes of the digital hours meter H01: OPERATION mode Displays the total number of hours the unit has been powered on in units of 1 hour.

  • Page 121: Condensation

    8-2 Condensation When this unit is moved from a cold place to a warmer place, or operated in high humidity, condensation may form on the optical pickup. This is called condensation, and if the unit is operated in this state, it may make correct recording and playback impossible.

  • Page 122: Alarms

    8-4 Alarms An alarm (warning message) appears in the time data display when an operation is attempted which is inappropriate for the settings on this unit or the state of the disc. The video panel and an external monitor to which the output of the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER) connector is input displays the alarm message and also the action to take to resolve the problem.
  • Page 123 Reset the items in the setup menu. It is time to exchange the battery on the board. Contact your Sony service representative. Exchange with a charged battery pack. See 3-2-3 “Using a Battery Pack” (page 33) for more information about exchanging battery packs.
  • Page 124 Message in time Display data display condition 4CHx24 Clip on, limit 8CHx16 Clip No Support! on, limit, off ILL. Index! on, limit, off FORMAT NG! on, limit, off DI read err on, limit, off DRV ADJ err on, limit, off a) With respect to setting of basic menu item 016 During playback Message in time...
  • Page 125 Message in time Display data display condition No Disc! No Disc! on, limit, off No Disc! on, limit, off REC INHI.! REC INHI.! IMX50 Clip on, limit IMX40 Clip IMX30 Clip DVCAM Clip 4CHx24 Clip 8CHx16 Clip REC INHI.! on, limit REC INHI.! on, limit, off REC INHI.!
  • Page 126 Message in time Display data display condition MAX# SB CLP on, limit, off CL OVER DUR on, limit, off Run Salvage on, limit, off CNT mode! TC EXT! REGEN mode! REC-PAUSE! REC mode! on, limit REC mode! on, limit, off REC mode! on, limit REC mode!
  • Page 127 Message in time Display data display condition STOP ONCE! on, limit STOP ONCE! on, limit, off No EM Space on, limit, off EM Full! on, limit, off Formatting! on, limit, off Disc Damage on, limit, off Non AV Full on, limit, off on, limit, off Index File! on, limit, off...
  • Page 128 Message in time Display data display condition Run Salvage on, limit MAX # Files on, limit, off Disc Full! on, limit, off MAX# SB CLP on, limit, off CL OVER DUR on, limit, off Disc Damage on, limit, off Non AV Full on, limit, off No Clip! on, limit...
  • Page 129 CONFIG” — “DATA LENGTH” • Maintenance menu item “AUDIO CONFIG” — “NON-AUDIO INPUT” See 7-4-2 “Maintenance Menu Operations” (page 114) about how to make these settings. Input a reference video signal to the player and recorder. Contact your Sony service representative. 8-4 Alarms...
  • Page 130 ON” audio signals. Input “EMPHASIS OFF” signal. Action See 8-2 “Condensation” (page 121). Contact your Sony service representative. Note The unit will operate, but continued use in this state will result in rising temperatures in the unit or drive, with the risk of fire or...

  • Page 131: Specifications

    Specifications General Power requirements 100 V to 240 V AC, 50/60 Hz DC, battery Power consumption AC: 37W DC or battery: 31W Peak inrush current (1)Power ON, current probe method: 65 A (240 V), 30 A (100 V) (2)Hot switching inrush current, measured in accordance with European standard EN55103-1: 35 A (230 V)
  • Page 132 ±1 times normal speed Shuttle mode ±20 times normal speed Video performance Sampling frequency Y: 13.5 MHz, R–Y/B–Y: 6.75 MHz Quantization 10 bits/sample Analog composite input to analog composite output Bandwidth: 30 Hz to 4.5 MHz +0.5/–1.5 dB (NTSC), 25 Hz to 5.5 MHz +0.5/– 1.5 dB (PAL) S/N ratio: 53 dB or more Differential gain: 2% or less...

  • Page 133: Accessories Supplied

    Notes • Always make a test recording, and verify that it was recorded successfully. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF FAILURE OF THIS UNIT OR ITS...

  • Page 134: Using The Shoulder Belt

    Using the Shoulder Belt The following figures show how to fit the shoulder belt (not supplied). Caution If you fit the shoulder belt incorrectly, the unit may fall down and cause body injury. Follow the procedures described below to fit or remove the shoulder belt. To fit the shoulder belt To remove the shoulder belt While pressing down the indication PRESS, move the...

  • Page 135: Notice Concerning The Software License Of This Unit

    Notice Concerning the Software License of This Unit Thank you for your purchasing this Sony product. Please read the following notice before using the product. By installing, copying or otherwise using the product, you will be deemed to have understood and agreed to the content of the notice.
  • Page 136 GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program”...
  • Page 137 a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange;...
  • Page 138 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
  • Page 139 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail.
  • Page 140 For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it.
  • Page 141 The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language.
  • Page 142 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License.
  • Page 143 containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.
  • Page 144 to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library.
  • Page 145 END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).
  • Page 146 THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
  • Page 147 NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ----- Part 2: Networks Associates Technology, Inc. copyright notice (BSD) ----- Copyright © 2001, Networks Associates Technology, Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: •...

  • Page 148: Mpeg-4 Visual Patent Portfolio License

    MPEG-4 Visual Patent Portfolio License This product is licensed under the MPEG-4 Visual Patent Portfolio License. For the personal and non-commercial use of a consumer for (i) encoding video in compliance with the MPEG-4 Visual Standard (“MPEG-4 Video”) and/or (ii) decoding MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed by MPEG LA to provide MPEG-4 Video.

  • Page 149: Glossary

    Glossary AES/EBU A standard established jointly by the AES (Audio Engineering Society) and EBU (European Broadcasting Union) for serial transmission of digital audio. Two channels of audio can be transmitted via a single connector. Clip A recording unit. Clips are created every time recording starts and stops.
  • Page 150 UMID Unique Material Identifier. A standard (SMPTE 330M) for video and audio metadata. The Basic section of a UMID contains a globally unique number and a material number for the identification of recorded material. An optional section called the “Source Pack” contains information such as the time and location of recording.

  • Page 151: Assigning User-Defined Clip Titles 75 Index

    Essence mark recording 48, 51 Extended setup menu 97 items 97 operations 108 External monitor connection 25 EXT-LK indicator 18 Features of PDW-R1 9 File access mode file operations 78 File operations 72 directory structure 72 file access mode 78...
  • Page 152 KEY INHI indicator 17 KEY INHI switch 12 LCD panel 11, 17 Level adjustment 43 LEVEL knob 21 LIGHT switch 20 Line mode setting 7 Live logging function 71 Loading/unloading a disc 38 LOCAL 12 Maintenance 72, 120 periodic 120 Maintenance menu 112 items 112 operations 114...
  • Page 153 types 36 Time data settings section 13 Title 75 Troubleshooting 120 UB/VIUB indicator 18 U-BIT 13 UMID data 109 User bit recording 44 VARIABLE switch 15 VIDEO IN connectors 23 INPUT SEL button 19 OUT 1, OUT 2 (SUPER) connectors 23 Video panel 17 Video processing adjusting parameters 49...
  • Page 154 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...
  • Page 155 Sony Corporation PDW-R1 (SY) http://www.sony.net/ © 2006 3-991-786-02 (1)

Table of Contents