Table of Contents
Advertisement
3.
Remove the FP-209 board.
(1) Remove the two screws to detach the LCD bracket.
(2) Remove the MCD knob.
(3) Remove the five AU-VR knobs.
(4) Remove the toggle SW sheet and the insulating sheet.
LCD bracket
MCD knob
4.
Install the removed parts by reversing the steps of removal.
5.
Perform software settings using the menu after replacing/repairing the FP-209 board. (Refer
after Replacing or Repairing the Block and
PDW-HD1550
PSW2.6 x 6
Board")
Toggle SW sheet
Insulating sheet
AU-VR knobs
FP-209 board
to"1-9. Service Action
6-7
Advertisement
Table of Contents
