Table of Contents
Advertisement
Preparation
1.
Connect the analog composite waveform monitor
Connect the analog composite waveform monitor to COMPOSITE OUTPUT 1 connector of the unit as follows.
PMW
1
COMPOSITE
OUTPUT
2
Output Level Adjustment
Output channel
COMPOSITE OUTPUT 1
B
1.
Display the maintenance menu. (Refer to 4-1-2.)
2.
Select "VIDEO OUT LEVEL".
Menu hierarchy
[M1 : ADJUST]
[A2 : AUDIO/VIDEO/BATTERY]
[A20 : VPR VR]
[VIDEO OUT LEVEL]
3.
Check that level B of the white signal of COMPOSITE OUTPUT 1 output meets the specification. If level B does
not meet the specification, adjust it.
Tip
Both COMPOSITE OUTPUT 1 and COMPOSITE OUTPUT 2 (SUPER) are modified by "A20 : VPR VR" menu
at the same time.
PDW-HD1550
Composite
waveform monitor
75 Ω
Adjustment point (A20 : VPR VR)
VIDEO OUT LEVEL
Specification
B = 700 ±7 mV
8-10
Advertisement
Table of Contents
