Sony PDW-HD1550 Service Manual page 67

LOG Alarm message in
status display area
— Clip End!
— EDL Top!
— EDL End!
— MAX # Clips
— Media Full!
— TC EXT!
— REGEN mode!
— REC mode!
— STOP ONCE!
— Exit THUMBNAIL
mode!
— REMOTE!
No Disc!
Media Top!
Media End!
REC INHI.!
— No EM Space
— EM Full!
— Illegal Operation!
— Media is not Ready.
PDW-HD1550
Alarm message in video
monitor screen
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Description/action
During playback, this appears if you execute a for-
ward search when the unit is stopped at the last
frame of a clip.
To move to another clip, press the PREV, NEXT,
SHIFT + PREV, or SHIFT + NEXT button, or per-
form a thumbnail search.
During EDL playback, this appears if you press the
PREV button at the first frame of the first sub clip
of an EDL.
During EDL playback, this appears if you press the
NEXT button at the last frame of the last sub clip
of an EDL.
No more clips can be recorded because the maxi-
mum number of clips has been recorded.
Delete unneeded clips.
Recording or copying is not possible because there
is no free space on the media.
Delete unneeded clips.
This appears when TCG is set to "EXT" and PRST/
RGN to "PRESET" in order to preset time code or
user bits, on page P4 TC of the function menu.
Set TCG to "INT".
This appears when PRST/RGN is set to "TC" or
"VITC" in order to preset time code or user bits,
on page P4 TC of the function menu.
Set PRST/RGN to "PRESET".
Stop recording and try again.
This appears when an attempt is made to change
media during recording or playback.
Stop the recording or playback and try the opera-
tion again.
This appears when an attempt is made to change
media while the clip list screen is displayed.
Switch to the basic operation screen or the video
monitor screen and try the operation again.
Press the REMOTE button and turn off the light,
to put this unit into LOCAL mode.
No Disc! Insert a Professional Disc before operate.
An attempt has been made to execute a reverse
search when the unit is stopped at the first frame
of the first clip after disc playback.
An attempt has been made to execute a forward
search when the unit is stopped at the last frame of
the last clip after disc playback.
Set the Write-Inhibit tab on the disc so as to enable
recording.
This appears when any essence mark was not re-
corded because there is no space before and after
the desired position.
Delete unneeded shot marks 0 to 9 in the chapter
thumbnail screen.
This appears when no more essence marks can be
recorded.
Delete unneeded shot marks 0 to 9 in the chapter
thumbnail screen.
This appears when an attempt is made to carry out
an invalid operation.
Mounting the media is in progress.
2-13