Table of Contents
Advertisement
Procedure
1.
Remove the top plate assembly, stay assembly and loader assembly to make the lenses in the optical block assembly
visible.
• Removing of top plate assembly: Refer to
• Removing of stay assembly: Refer to
• Removing of loader assembly: Refer to
Lenses
2.
Attaching the four lens cleaners to the lens cleaning base (4G).
Note
• Be sure to use tweezers so as not to contaminate the lens cleaner.
• Hold the shaft of the lens cleaner with tweezers and attach it to the lens cleaning base (4G).
• After taking the lens cleaner out of the bag, attach it to the lens cleaning base (4G) without placing it on the
desk.
Lens cleaning base (4G)
PDW-HD1550
"6-3. Top Plate
"6-7-1. Optical Drive
"6-7-5. Loader
Lens cleaners
Assembly".
Assembly".
Assembly".
Rear of this unit
Shaft of the lens cleaner
Tweezers
5-7
Advertisement
Table of Contents
