Table of Contents
Advertisement
4.
Press the [F5 (SET)] button.
After the update starts, a message indicating that update is in progress and the lapse time are shown.
Note
Do not remove the USB memory device during the update.
Software Update
Now Executing Update via
USB Memory...
Total time:00:00
Upon completion of the update, the unit restarts automatically. After the unit has restarted, the update result is
displayed.
Software Update
Update was successfully completed.
Case of success
5.
Press the [PUSH SET] knob to close the displayed screen.
6.
Execute RESET ALL SETUP in the MAINTENANCE MENU. (Refer
PDW-HD1550
Software Update
Update was failed.
OK:it,sys,pddrive,pkglist
NG:fp
OK
Case of failure
OK
to"4-6-3. RESET ALL SETUP
(M49)")
1-27
Advertisement
Table of Contents
