6.
Remove a screw (P1.7 x 2.5) and lift up the SE-1005 board to the direction of the arrow C.
7.
Remove the two screws (K2.6 x 8) to detach the optical block.
Note
• When removing or installing the optical block assembly, push the gear with a bamboo skewer or the like so
that the lead rack assembly is not damaged.
• When holding the optical block assembly, touch only portions A and B.
Optical block assembly
8.
Remove the two screws (P1.7 x 2.5) to detach the lead rack assembly.
PDW-HD1550
Optical block assembly
B
K2.6 x 8
Portion B
Portion
A
Lead rack
assembly
P1.7 x 2.5
C
SE-1005 board
K2.6 x 8
Gear
6-25