Table of Contents
Advertisement
2.
Remove the ADI-11 board.
(1) Disconnect the flexible flat cable from the connector (CN036) on the ADI-11 board.
(2) Remove the two screws to detach the ADI-11 board.
(3) Remove the spacer.
Spacer
Flexible flat cable
3.
Remove the VPR-118 board.
(1) Disconnect the flexible flat cable from the connector (CN035) on the VPR-118 board.
(2) Remove the two screws (PSW2.6 x 6).
(3) Remove the screw (P3 x 8).
(4) Remove the four screws (P2.6 x 8).
(5) Remove the screw (PS3 x 5) to detach the VPR-118 board.
Flexible flat cable
CN035
VPR-118 board
4.
Install the removed parts by reversing the steps of removal.
PDW-HD1550
CN036
PSW2.6 x 6
ADI-11 board
P2.6 x 8
PS3 x 5
P3 x 8
P2.6 x 8
6-52
Advertisement
Table of Contents
