Table of Contents
Advertisement
9.
Remove the slide shaft from the optical block assembly.
Note
• When installing the lead rack assembly, fit the two bosses with the two holes in the lead rack assembly.
• The removed lead rack assembly may be deformed with the spring force. Install it within the least possible
time period (max. 30 minutes). When leaving the lead rack assembly for a long time, remove the spring to
prevent deformation of the lead rack assembly.
Optical block assembly
10. Install the removed parts by reversing the steps of removal.
Note
After replacing/repairing the optical block assembly, perform the steps after replacement/repair. (Refer to
Action after Replacing or Repairing the Block and
PDW-HD1550
Slide shaft
Boss
Boss
Hole
Lead rack assembly
Board")
Hole
P1.7 x 2.5
"1-9. Service
6-26
Advertisement
Table of Contents
