Table of Contents
Advertisement
8.
Remove the loader assembly to the direction of the arrow B.
Note
• Be careful for the loader assembly not to contact the five pins of the cartridge sensor.
• The spindle motor has a powerful magnet. Be careful so that a part of the loader assembly is not attracted by
the magnetic force or caught by the tip of the spindle motor.
Loader assembly
Spindle motor
Pin
cartridge
sensors
PDW-HD1550
Screws with stopper
(PSW2 x 5)
Holes
cartridge
sensors
A
Portion A
Pin
B
Loader assembly
Hole
Pin
Latch
CN36
(LDR-36 board)
FPC SE1005-LDR36
Motor harness
FPC SE1005-LDR36
CN3
(SE-1005 board)
6-20
Advertisement
Table of Contents
