Table of Contents
Advertisement
6.
Press the [PUSH SET] knob.
A confirmation window appears waiting for insertion of a cartridge.
LD IL ADJUST
OP-0A
INSERT DISC
EXIT: MENU KEY
7.
Insert a cartridge.
The result is displayed.
LD IL ADJUST
OP-0A
ADJUSTING...-->.
EXIT: MENU KEY
The following information is displayed for NG.
• When "ADJUSTING...FAILURE" is displayed
LD IL ADJUST
OP-0A
ADJUSTING...FAILURE
EXIT: MENU KEY
The flexible card wire between the optical block assembly and the BD-42 board may be connected improperly or
the firmware may not support the optical block XDH-422. (Refer to
• When "LOADER ISN'T ATTACHED" is displayed
LD IL ADJUST
OP-0A
LOADER ISN'T ATTACHED
EXIT: MENU KEY
The loader assembly may not be installed (not reassembled in product status) or there may be a problem in flexible
card wire connection between the loader assembly and the BD-42 board.
PDW-HD1550
OP-0A
ADJUSTING...COMPLETED
EXIT: MENU KEY
"Optical
drive".)
7-3
Advertisement
Table of Contents
