Mitsubishi Electric MELSERVO-J3 Series Handbook page 342

Part 6: Common Reference Material
(3) Execute file diversion.
Select the CPU type, OS type, and Operation method in the CPU/OS selection, and click the [Diversion]
button.
(4) Execute servo parameter conversion.
Select the target servo amplifier setting and click the [OK] button.
The servo parameters are converted as follows depending on the target servo amplifier setting.
When "SSCNET III / H" is selected, MR-J3-_B_ is converted to MR-J4-_B_, MR-J3W-_B is converted to
MR-J4W2-_B
When "SSCNET III" is selected: Utilize the MR-J3-_B_ and MR-J3W-_B data without conversion.
6 - 65