Table of Contents
Advertisement
Follow the procedure next to get to Diagnostic:
Step 1.
From the main menu, type 24 to open Menu 24 – System Maintenance.
Step 2.
From this menu, type 4. Diagnostic to open Menu 24.4 – System Maintenance – Diagnostic.
Figure 19-9 Menu 24.4 System Maintenance : Diagnostic
The following table describes the diagnostic tests available in menu 24.4 for and the connections.
Table 19-4 Menu 24.4 System Maintenance Menu : Diagnostic
FIELD
Reset ADSL
Ping Host
Reboot System
Command Mode
Host IP Address
19.6 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from
the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed
information on CI commands. Enter 8 from Menu 24 — System Maintenance. A list of valid commands
can be found by typing help or ? at the command prompt. Type "exit" to return to the SMT main menu
when finished.
System Information and Diagnosis
Menu 24.4 - System Maintenance – Diagnostic
ADSL
1.
Reset ADSL
TCP/IP
12. Ping Host
Host IP Address= N/A
Re-initialize the ADSL link to the telephone company.
Ping the host to see if the links and TCP/IP protocol on both systems are working.
Reboot the Prestige.
Type the mode to test and diagnose your Prestige using specified commands.
If you typed 12 to Ping Host, now type the address of the computer you want to ping.
System
21. Reboot System
22. Command Mode
Enter Menu Selection Number:
DESCRIPTION
Prestige 645R-A Series User's Guide
19-9
Advertisement
Table of Contents
Troubleshooting
