Restore Using Ftp Session Example; Uploading Firmware And Configuration Files; Firmware File Upload; Figure 20-4 Restore Using Ftp Session Example - ZyXEL Communications Prestige 645R-A Series User Manual

Prestige 645R-A Series User's Guide

20.3.2 Restore Using FTP Session Example

ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit
Refer to section 20.2.5 to read about configurations that disallow TFTP and FTP over WAN.

20.4 Uploading Firmware and Configuration Files

This section shows you how to upload firmware and configuration files. You can upload configuration files
by following the procedure in the previous Restore Configuration section or by following the instructions in
Menu 24.7.2 – System Maintenance – Upload System Configuration File (for console port).
DO NOT INTERRUPT THE FILE TRANSFER PROCESS AS THIS MAY

20.4.1 Firmware File Upload

FTP is the preferred method for uploading the firmware and configuration. To use this feature, your
computer must have an FTP client.
When you telnet into the Prestige, you will see the following screens for uploading firmware and the
configuration file using FTP.
20-8

Figure 20-4 Restore Using FTP Session Example

PERMANENTLY DAMAGE YOUR PRESTIGE.
WARNING!
Firmware and Configuration File Maintenance