Table 8-2 System Status: Show Statistics - ZyXEL Communications Prestige 645R-A Series User Manual

The following table describes the labels in this screen.
LABEL
System up Time This is the elapsed time the system has been up.
WAN Port Statistics This is the WAN port.
Link Status This is the status of your WAN link.
Upstream Speed This is the upstream speed of your Prestige.
Downstream Speed This is the downstream speed of your Prestige.
Node-Link This field displays the remote node index number and link type. Link types are PPPoA,
ENET, RFC 1483 and PPPoE.
Status For the WAN port, this displays the port speed and duplex setting if you're using Ethernet
encapsulation and down (line is down), idle (line (ppp) idle), dial (starting to trigger a
call) and drop (dropping a call) if you're using PPPoE encapsulation.
For a LAN port, this shows the port speed and duplex setting.
LAN Port Statistics This is the LAN port.
TxPkts This field displays the number of packets transmitted on this port.
RxPkts This field displays the number of packets received on this port.
Errors This field displays the number of error packets on this port.
Tx B/s This field displays the number of bytes transmitted in the last second.
Rx B/s This field displays the number of bytes received in the last second.
Up Time This field displays the elapsed time this port has been up.
Collisions This is the number of collisions on this port.
CPU Load This field specifies the percentage of CPU utilization.
Poll Interval(s) Type the time interval for the browser to refresh system statistics.
Maintenance

Table 8-2 System Status: Show Statistics

Prestige 645R-A Series User's Guide
DESCRIPTION
8-5