Figure 16-6 Menu 15.1.2 - ZyXEL Communications Prestige 645R-A Series User Manual

Prestige 645R-A Series User's Guide
FIELD
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
User-Defined Address Mapping Sets
Now let's look at option 1 in menu 15.1. Enter 2 to bring up this menu. We'll just look at the differences
from the previous menu. Note the extra Action and Select Rule fields mean you can configure rules in this
screen. Note also that the [?] in the Set Name field means that this is a required field and you must enter a
name for the set.
Set Name= ?
Idx Local Start IP
--- ---------------
1.
2
3.
4.
5.
6.
7.
8.
9.
10.
If the Set Name field is left blank, the entire set will be deleted.
The Type, Local and Global Start/End IPs are configured in menu 15.1.1.1
Ordering Your Rules
Ordering your rules is important because the Prestige applies the rules in the order that you specify. When a
rule matches the current packet, the Prestige takes the corresponding action and the remaining rules are
ignored. If there are any empty rules before your new configured rule, your configured rule will be pushed
16-6
Table 16-2 SUA Address Mapping Rules
Menu 15.1.2 - Address Mapping Rules
Local End IP
---------------
Action= Edit
Press ENTER to Confirm or ESC to Cancel:

Figure 16-6 Menu 15.1.2

(described later) and the values are displayed here.
DESCRIPTION
Global Start IP
---------------
0.0.0.0
Select Rule=
Global End IP Type
--------------- ------
Serve+
EXAMPLE
NAT