ZyXEL Communications Prestige 645R-A Series User Manual page 112

Prestige 645R-A Series User's Guide
FIELD
Rem Login
Rem Password
Outgoing:
My Login
My Password
Authen
Route
Bridge
Edit IP/Bridge
Edit ATM Options
Telco Option
Allocated Budget
(min)
Period (hr)
13-4
Table 13-1 Menu 11.1 Remote Node Profile
Type the login name that this remote node will use to call your
Prestige. The login name and the Rem Password will be used to
authenticate this node.
Type the password used when this remote node calls your Prestige.
Type the login name assigned by your ISP when the Prestige calls
this remote node.
Type the password assigned by your ISP when the Prestige calls this
remote node.
This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP – Your Prestige will accept either CHAP or PAP when
requested by this remote node.
CHAP – accept CHAP (Challenge Handshake Authentication
Protocol) only.
PAP – accept PAP (Password Authentication Protocol) only.
This field determines the protocol used in routing. Options are IP and
None.
When bridging is enabled, your Prestige will forward any packet that
it does not route to this remote node; otherwise, the packets are
discarded. Select Yes to enable and No to disable.
Press [SPACE BAR] to select Yes and press [ENTER] to display
Menu 11.3 – Remote Node Network Layer Options.
Press [SPACE BAR] to select Yes and press [ENTER] to display
Menu 11.6 – Remote Node ATM Layer Options.
This sets a ceiling for outgoing call time for this remote node. The
default for this field is 0 meaning no budget control.
This field is the time period that the budget should be reset. For
example, if we are allowed to call this remote node for a maximum of
10 minutes every hour, then the Allocated Budget is (10 minutes)
and the Period (hr) is 1 (hour).
DESCRIPTION EXAMPLE
Remote Node Configuration
IP
No
No
No