Figure 21-8 Ip Routing Policy Example; Figure 21-9 Applying Ip Policies Example - ZyXEL Communications Prestige 645R-A Series User Manual

Policy Set Name= set2
Active= Yes
Criteria:
Action= Matched
Press Space Bar to Toggle.
Step 6.
Check Menu 25.1 — IP Routing Policy Setup to see if the rule is added correctly.
Step 7. Apply both policy sets in menu 3.2 as shown next.
Press Space Bar to Toggle.
IP Policy Routing
IP Protocol = 6
Type of Service= Don't Care
Precedence = Don't Care
Source:
addr start= 0.0.0.0
port start= 0
Destination:
addr start= 0.0.0.0
port start= 20
Gateway addr =192.168.1.100
Type of Service= No Change
Precedence = No Change
Press ENTER to Confirm or ESC to Cancel:

Figure 21-8 IP Routing Policy Example

Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 64
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies= 1,2
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:

Figure 21-9 Applying IP Policies Example

Prestige 645R-A Series User's Guide
Menu 25.1.1 - IP Routing Policy
Packet length= 10
Len Comp= N/A
end= N/A
end= N/A
end= N/A
end= 21
Log= No
21-9